NETGEAR GSM7228PS-100NAS show ipv6 mld traffic

IPv6 Multicast Commands
454
ProSafe Managed Switch
The following information is displayed if the operational mode of the MLD interface is
enabled.
Querier Status
Querier
Address
Querier Up Time
Querier Expiry
Time
Wrong Version
Queries
Number of
Joins
Number of
Leaves
Number of
Groups
show ipv6 mld traffic
Use this command to display MLD statistical information for the router.
Format show ipv6 mld traffic
Mode • Privileged EXEC
• User EXEC
Query Max
Response Time Indicates the configured maximum query response time (in seconds) advertised in MLD
queries on this interface.
Robustness Displays the configured value for the tuning for the expected packet loss on a subnet
attached to the interface.
Startup Query
interval This valued indicates the configured interval between General Queries sent by a Querier
on startup.
Startup Query
Count This value indicates the configured number of Queries sent out on startup, separated by
the Startup Query Interval.
Last Member
Query Interval This value indicates the configured Maximum Response Time inserted into
Group-Specific Queries sent in response to Leave Group messages.
Last Member
Query Count This value indicates the configured number of Group-Specific Queries sent before the
router assumes that there are no local members.
Field Description
This value indicates whether the interface is an MLD querier or non-querier on the
subnet it is associated with.
The IP address of the MLD querier on the subnet the interface is associated with.
Time elapsed in seconds since the querier state has been updated.
Time left in seconds before the Querier loses its title as querier.
Indicates the number of queries received whose MLD version does not match the MLD
version of the interface.
The number of times a group membership has been added on this interface.
The number of times a group membership has been removed on this interface.
The current number of membership entries for this interface.
Field Description