Switching Commands
159
ProSafe Managed Switch
0/1 ip-mac 210.1.1.3 00:02:B3:06:60:80 10
0/1 ip-mac 210.1.1.4 00:0F:FE:00:13:04 10

show ip source binding

This command displays the IPSG bindings.
Format show ip source binding [{static/dynamic}] [interface unit/slot/port]
[vlan id]
Mode • Privileged EXEC
• User EXEC
The following shows sample CLI display output for the command.
(switch) #show ip source binding
MAC Address IP Address Type Vlan Interface
----------------- --------------- ------------- ----- -------------
00:00:00:00:00:08 1.2.3.4 dhcp-snooping 2 1/0/1
00:00:00:00:00:09 1.2.3.4 dhcp-snooping 3 1/0/1
00:00:00:00:00:0A 1.2.3.4 dhcp-snooping 4 1/0/1
Dynamic ARP Inspection Commands
Dynamic ARP Inspection (DAI) is a security feature that rejects invalid and malicious ARP
packets. DAI prevents a class of man-in-the-middle attacks, where an unfriendly station
intercepts traffic for other stations by poisoning the ARP caches of its unsuspecting
neighbors. The miscreant sends ARP requests or responses mapping another station’s IP
address to its own MAC address.
DAI relies on DHCP snooping. DHCP snooping listens to DHCP message exchanges and
builds a binding database of valid {MAC address, IP address, VLAN, and interface} tuples.
When DAI is enabled, the switch drops ARP packets whose sender MAC address and
sender IP address do not match an entry in the DHCP snooping bindings database. You can
optionally configure additional ARP packet validation.
Term Definition
MAC Address The MAC address for the entry that is added.
IP Address The IP address of the entry that is added.
Type Entry type; statically configured from CLI or dynamically learned from DHCP Snooping.
VLAN VLAN for the entry.
Interface IP address of the interface in unit/slot/port format.