NETGEAR GSM7228PS-100NAS SNMP Commands

password
encrypted
Management Commands
683
ProSafe Managed Switch
no password(AAA IAS User Configuration)
Use this command to remove a password for a user in the IAS database.
Format no password
Mode
clear aaa ias-users
Use this command to remove all users from the IAS database.
Format clear aaa ias-users
Mode
show aaa ias-users
Use this command to display configured IAS users and their attributes. Passwords
configured are not shown in the show command output.
Format show aaa ias-users
Mode
SNMP Commands
This section describes the commands you use to configure Simple Network Management
Protocol (SNMP) on the switch. You can configure the switch to act as an SNMP agent so
that it can communicate with SNMP managers on your network.
snmp-server
Use this command to set the name and the physical location of the switch and the
organization responsible for the network. The range for <name>, <loc> and <con> is from 1
to 31 alphanumeric characters.
Default
Format snmp-server {sysname <name> | location <loc> | contact <con>}
Mode
Parameter Definition
Password for this level. Range: 8-64 characters.
Encrypted password to be entered, copied from another switch configuration.
AAA IAS User Config
Privileged EXEC
Privileged EXEC
none
Global Config