NETGEAR GSM7228PS-100NAS show captive-portal configuration client status

Captive Portal Commands
764
ProSafe Managed Switch
If the interface is specified, the following terms are displayed.
CP ID
CP Name
Protocol
Verification
Example
(switch)#show captive-portal interface client status
Client Client
Intf Intf Description MAC Address IP Address
------ ----------------------------------- -----------------
---------------
1/0/1 Unit: 1 Slot: 0 Port: 1 Gigabit 0002.BC00.1290 10.254.96.47
1/0/2 Unit: 1 Slot: 0 Port: 2 Gigabit 0002.BC00.1292 10.254.96.49
1/0/3 Unit: 1 Slot: 0 Port: 3 Gigabit 0002.BC00.1293 10.254.96.50
(switch)#show captive-portal interface 1/0/1 client status
Interface................................. 1/0/1
Interface Description..................... Unit: 1 Slot: 0 Port: 1 Gigabit
Client Client
MAC Address IP Address CP ID CP Name Protocol Verification
----------------- --------------- ----- -------------- --------
------------
0002.BC00.1290 10.254.96.47 1 cp1 http local
0002.BC00.1291 10.254.96.48 2 cp2 http local
show captive-portal configuration client status
Use this command to display the clients authenticated to all captive portal configurations or a
to specific configuration. <1-10> is the captive portal ID.
Format show captive-portal configuration [ <1-10> ] client status
Mode
CP ID
CP Name
Client MAC
Address
Client IP Address
Interface
Term Definition
The ID of the captive portal associated with the client
The name of the captive portal associated with the client
The protocol the client is using
The user verification mode
Privileged EXEC mode
Term Definition
The captive portal ID
The captive portal name
The MAC address of the client associated with the captive portal instance.
The IP address of the client associated with the captive portal instance
The interface on which the client is authenticated.