Siemens HiPath Xpressions Unified Messaging user manual Listen to message Push

Mailbox Processing on the Telephone and the Voice Mail Service

Operating your Mailbox using VMS

Selection options in the Inbox

1Record a new message and send it to one or more recipients (multi- address distribution):

Push 1.

3Listen to message: Push 3.

3Pause playback and resume playback: Push 3.

5Repeat message header: Push 5.

*Skip message and play back next message header: Push the star key.

04 Reverse the currently set playback order: The following basic setting is defined by the system:

●The new messages of the various message groups are played back first, starting with the first message group and the newest message.

●Previously heard messages of the various message groups will then

be played back, starting with the first message group and the new- est message.

Following this entry, previously heard messages of the various message groups will be played back first, starting with the last message group and the oldest message. The new messages of the various message groups will then be played back, starting with the last message group and the oldest message:

Push 0 and then push 4.

04 2 Jump to the previous message type: Push 0, push 4 and push then 2.

04 3 Jump to the previous message group: Push 0, push 4 and push then 3.

06 Restores the basic setting (see above) of the playback order: Push 0 and then push 6.

06 2 Jump to the next message type: Push 0, push 6 and push then 2.

06 3 Jump to the next message group: Push 0, push 6 and push then 3.

03 Automatic playback of incoming messages: Push 0 and then push 3.

A31003-S2330-B690-2-7619, January 2003	3-49
HiPath Xpressions V3.0, User Manual