Siemens HiPath Xpressions Unified Messaging Defining a mobile phone number for call forwarding

Mailbox Processing on the Telephone and the Voice Mail Service Voicemail

Operating your Mailbox with PhoneMail

Say your name.

The same control options and key sequences available when you are recording messages are available here (see Section 3.2.3.4, “During the recording process”). The following key sequences are also permit- ted: *7# to pause recording/return to the main menu, *76 to pause re- cording/terminate the connection. The *78 key sequence for playing back the last eight seconds of the recorded messages is not permitted.

*# End the recording process: push the star key and then push the pound key.

Defining a mobile phone number for call forwarding

8In the main menu: push 8 to access the answering options.

5In the menu for changing the mobile phone number: push 5. You now have the following options:

1Change mobile phone number: push 1 or

2Enable function: push 2 or

3Disable function: push 3 or

#Cancel, retain mobile phone number and status: push the pound key.

The system prompts you to enter required mobile phone number entries if you have pushed 1.

# Enter the mobile phone number and confirm the entry with the pound key.

You can only define mobile phone numbers if your system administrator has enabled this op- tion. To do this, dial the trunk seizure code (normally 0) in front of the telephone number.

Defining mailbox deputy numbers

8In the main menu: push 8 to access the answering options.

6In the menu for changing the answering options: push 6. You now have the following options:

1Change mailbox deputy: push 1 or

2Enable mailbox deputy: push 2 or

3Disable mailbox deputy: push 3.

#Cancel, keep referral extension: push the pound key.

3-24	A31003-S2330-B690-2-7619, January 2003
	HiPath Xpressions V3.0, User Manual