Siemens HiPath Xpressions Unified Messaging user manual Operating your Mailbox using VMS

Mailbox Processing on the Telephone and the Voice Mail Service

Operating your Mailbox using VMS

0* Cancel the entire process and return to the main menu: Push 0 and then push the star key.

(b)Sending messages using the broadcast message feature (see Section 3.3.5.2)

The following options are provided. Note: You require special privileges to send messages us- ing the broadcast message feature.

2Re-record message and send it using broadcast message feature: Push 2.

* Select a broadcast distribution list:

Enter the code numbers of the broadcast distribution list and push the star key to conclude the entry.

# If the entry was incorrect: delete the entered code numbers of a broadcast distribution list:

Push the pound key. You can resume the process of entering the code numbers of the broadcast distribution lists immediately afterwards.

Once you have entered the distribution list(s), the standard operating steps for recording and editing your message are now available (see Section 3.3.2.3, “Default Edit Options”).

1Start/stop recording of broadcast message: Push 1.

*Activate/broadcast the message: Push the star key.

0* Cancel the entire process and return to the main menu: Push 0 and then push the star key.

3-58	A31003-S2330-B690-2-7619, January 2003
	HiPath Xpressions V3.0, User Manual