Siemens HiPath Xpressions Unified Messaging Listen to message Push Pause playback. Push

Mailbox Processing on the Telephone and the Voice Mail Service

Operating your Mailbox using VMS

(c) Sending messages using the broadcast call feature (see Section 3.1.8.2)

The following options are provided. Note: You require special privileges to send messages us- ing the broadcast call feature.

4Re-record a message and send it using the broadcast call feature: Push 4.

* Select a broadcast call list:

Enter the code numbers for the broadcast call list and push the star key to conclude the entry.

# If the entry was incorrect: delete the entered code numbers for the broadcast call list:

Push the pound key. You can resume the entry of the code numbers for a broadcast call list immediately afterwards.

Once you have entered the distribution list(s), the standard operating steps for recording and editing your message are now available (see Section 3.3.2.3, “Default Edit Options”).

1Start/stop recording the broadcast call: Push 1.

*Activate/broadcast the broadcast call: Push the star key.

0* Cancel the entire process and return to the main menu: Push 0 and then push the star key.

(d)Scrolling previously sent messages

The following options are available when you are scrolling the outbound journal:

3Listen to message: Push 3.

3Pause playback. Push 3.

3 Resume playback: The input options available when listening to the message are available again.

Push 3.

*Next message: The selection options available under "Scroll Outbound Journal" are now available.

Push the star key.

44 Jump to the start of the message: The selection options available un- der "Scroll Outbound Journal" are now available.

Push 4 twice in quick succession.

A31003-S2330-B690-2-7619, January 2003	3-59
HiPath Xpressions V3.0, User Manual