Siemens U3585-J-Z125-8-76 1 manual Set-Disk-Parameter, Define Disk monitoring parameters

Statements for SM2 administrators SET-DISK-PARAMETER

SET-DISK-PARAMETER

Define DISK monitoring parameters

Function

This statement is used to define the disk devices for the DISK monitoring program.

Format

SET-DISK-PARAMETER

DEVICES = list-poss(256): <alphanum-name 2..4 with-wild>

Operands

DEVICES = list-poss(256): <alphanum-name 2..4 with-wild>

Specifies the mnemonic device names of the disk devices to be monitored. A check is carried out to establish whether these disk devices are defined in the configuration and are in the “attached” state. An asterisk (*) is also permitted as the last character in a wildcard specification.

Note

Up to 256 devices are monitored. If partial qualification means than more than 256 devices are defined, these are selected in the following order of priority:

–devices whose mnemonic device names have been specified in their entirety

–devices whose mnemonic device names have been specified in partially qualified form

–the sequence in the PDT (Physical Device Table)

U3585-J-Z125-8-76 123