Siemens U3585-J-Z125-8-76 1, SM2 monitoring system manual SM2 information screens, Active Parameter

SM2 information screens ACTIVE PARAMETER

5.2 SM2 information screens

ACTIVE PARAMETER

This screen displays the parameters set for the active monitoring programs. As many screens as are necessary are output. If sufficient space is available, all the parameters for one monitoring program are displayed on a single screen. It is only possible to request output from the administration section using the SHOW-ACTIVE-PARAMETER statement.

D016ZE04 SM2 ACTIVE PARAMETER						99-03-24	14:20:59
BCAM CONNECTION PARAMETER
-------------------------
INWAIT-BUCKETS		: 5, 10, 100, 1000
REACT-BUCKETS		: 500, 1000, 2000, 4000
INPROC-BUCKETS		: 5, 10, 100, 1000
OUTPROC-BUCKETS		: 5, 10, 100, 1000
BCAM CONNECTION SET
SET-NAME		: DIALOG			PORT1110
CONNECTION-TYPE		: REMOTE			REMOTE
HOST-SELECTION		:
(LOCAL	/ PARTNER )	(*ANY	/ *ANY	)	(*ANY	/ *ANY	)
CONNECTION-SELECTION		: *BY-NEA-NAME			*BY-PORT-NUMBER
(LOCAL	/ PARTNER	) ($DIALOG	/ *ANY	)	(	1110 / *ANY	)
CHANNEL-IO PARAMETER
--------------------
CHANNELS		: *ALL

Monitoring information

BCAM-CONNECTION-PARAMETER

INWAIT-BUCKETS	Definition of the upper limits of up to four ranges in which the
	INWAIT times are listed by order of magnitude
REACT-BUCKETS	Definition of the upper limits of up to four ranges in which the
	REACT times are listed by order of magnitude
INPROC-BUCKETS	Definition of the upper limits of up to four ranges in which the
	INPROC times are listed by order of magnitude
OUTPROC-
BUCKETS	Definition of the upper limits of up to four ranges in which the
	OUTPROC times are listed by order of magnitude

U3585-J-Z125-8-76 319