Siemens U3585-J-Z125-8-76 1 manual PCS report, Sqpln %, Sqact%, DUR-RO 1/SEC, DUR-RO-P 1/SEC

SM2 reports	PCS report
SQPLN (%)	System performance percentage planned for this category.
	(This variable is irrelevant for the SUM category and is therefore
	replaced by blanks.)
SQACT(%)	Current percentage of system performance for this category
RDACT	Current delay of all jobs in this category.
	If no dilation was sensed, ’**’ is output (see section on “dilation
	factor” on page 447 of the glossary).
	(A system-global value is given in the SUM line.)
DUR-RO (1/SEC)	Number of DURATION time slice runouts for tasks in this category.
	(The given service rate has been used up, the task is placed in the
	defined continuation category.)
DUR-RO-P (1/SEC)	Number of DURATION time slice runouts with preemption for tasks
	or jobs in this category. (Meaning as above; since the defined
	continuation category is not permitted because of overloading, the
	task is entered in task queue 6.)

Note on SR2000

The monitored data on service units is based on native CPU time (see “CPU time and CPU service units on SR2000” on page 446 of the glossary).

U3585-J-Z125-8-76 281