Siemens SM2 monitoring system, U3585-J-Z125-8-76 1 manual File, Monitor files, Name, Stats, =Off

FILE Statements for nonprivileged users

FILE

Monitor files

Function

This statement is used to select one or more files whose monitored data is to be output in the next monitoring cycle or is no longer to be output. The user may only include files in the monitoring process if this is permitted by the SM2 primary administrator.

If this is the case, the entry FILE appears in the USER MEASUREMENTS ALLOWED line of the SM2 MEASUREMENT STATUS screen.

Provided file monitoring is allowed, each user can include and exclude files which have been set up under his user ID in the monitoring process. It is also possible to include and exclude files which do not exist.

SM2 supports the simultaneous monitoring of up to 16 files for all users.

Format

Operation	Operands
FILE	NAME=filename
		[,STATS = ON]	
	[ 		 ]
		,STATS = OFF	

Operands

NAME
=filename	Specifies the name of the file whose access values are to be monitored
	or to be excluded from further monitoring.
	As a general rule, fully qualified file names must be specified, e.g.
	:A:$USERID.FILE1 (see the “DMS Macros” manual [2]).
STATS
=ON Includes the specified file in the monitoring process if this has not
	already been done (default).
=OFF	Excludes the specified file from the monitoring process.

164 U3585-J-Z125-8-76