Siemens U3585-J-Z125-8-76 1 manual Set-Sysstat-Parameter, Define Sysstat monitoring parameters

Statements for SM2 administrators SET-SYSSTAT-PARAMETER

SET-SYSSTAT-PARAMETER

Define SYSSTAT monitoring parameters

Function

This statement is used to define the devices for the SYSSTAT monitoring program.

Format

SET-SYSSTAT-PARAMETER

USED-DEVICES = *NONE / *ALL / list-poss(64): *DISK / *TAPE / <alphanum-name 2..4 with-wild>

Operands

USED-DEVICES =

USED-DEVICES = *NONE

No devices are to be monitored by the SYSSTAT monitoring program.

USED-DEVICES = *ALL

All devices are to be monitored with the exception of the communication controllers (CTCCs, TRANSDATA 960s, 8170 Cluster Controllers, LAN adapters, HNCs and SCPs).

USED-DEVICES = list-poss(64): *DISK

All disk devices are to be monitored.

USED-DEVICES = list-poss(64): *TAPE

All tape devices are to be monitored.

USED-DEVICES = list-poss(64):<alphanum-name 2..4 with-wild>

Specifies the mnemonic device names of the devices to be monitored. A check is carried out to establish whether these devices are defined in the configuration. An asterisk (*) is also permitted as the last character in a wildcard specification.

Note

SM2R1 uses the devices defined here to determine, among other things, the time equivalent for the productive performance of the peripherals (SM2R1 report 61) and the dilation factor (SM2R1 report 57). If possible, all devices should be monitored to capture precise values. If these reports are required, it is recommended that you specify USED- DEVICES=(*DISK,*TAPE).

U3585-J-Z125-8-76 131