Siemens SM2 monitoring system, U3585-J-Z125-8-76 1 manual NPS4801

NPS4801		Messages
NPS4801	INSUFFICIENT VIRTUAL ADRESS SPACE FOR ANALYSIS
	(B) Routing code: R	Weight: 99
	Meaning
	The storage space requested by the program could not be made available.
	The analysis run can be restarted using fewer reports.
NPS4853	NO MEASUREMENTS FOUND DURING ANALYSIS INTERVAL FOR ’(&00)’
	Meaning
	SM2 did not monitor the variable (&00) in the specified analysis interval.
NPS4854	(&00) SUPPRESSED DUE TO REPORT CONDITION
	Meaning
	Report (&00) suppressed because measurements are in given range.
NPS4901	VERSIONS OF ’SM2R1’ AND ’MTFILE’ INCOMPATIBLE
	(B) Routing code: R	Weight: 99
NPS4951	NO PERFORMANCE DATA AVAILABLE FOR CPU TYPE ’(&00)’. CONTACT SYSTEM ADMINISTRATOR
	(B) Routing code: R	Weight: 99
	Meaning
	Automatic analysis is not possible without limit values for the specified CPU type.
NPS4953	MONITORED DATA FOR ’(&00)’ REQUIRED TO COMPLETE AUTOMATIC ANALYSIS
	(B) Routing code: R	Weight: 99
	Meaning
	Automatic analysis should be conducted using all the required data (cf. the BS2000 manual
	’SM2’), otherwise it is possible that bottlenecks will remain undetected.
NPS4954	NO VM2000 RECORD FOUND. NO RELATIVATION OF PERFORMANCE DATA
	Meaning
	Automatic analysis needs the CPU QUOTA of VM2000 record for relativation of perfor-
	mance data.
NPS5000	UNKNOWN ERROR CODE ’(&00)’ OR SUBCODE ’(&01)’ DELIVERED FROM SM2
	(B) Routing code: R	Weight: 99
	Meaning
	SM2 delivered an error code (&00) or a subcode (&01) referring to a non-existent message.
NPUCOPY	Copyright (C) ’(&00)’ ’(&01)’ All Rights Reserved
NPULOAD	Program ’(&00)’, Version ’(&01)’ of ’(&02)’ loaded from file ’(&03)’
NPUSTRT	Procedure ’(&00)’, Version ’(&01)’ of ’(&02)’ started from file ’(&03)’

400 U3585-J-Z125-8-76