Siemens U3585-J-Z125-8-76 1, SM2 monitoring system SM2 information screens, Measurement Status

SM2 screen output SM2 information screens

SM2 information screens

The information screens are special in that they contain no monitored data, but provide information on the monitoring run and on the SM2 status. These screens are only output if explicitly requested by the user.

The first two screens listed are available in both the analysis subinterval and the administration facility. The others are only available to privileged users in the administration facility.

MEASUREMENT STATUS			Overview of all defined and active monitoring
			programs
USER MEASURED OBJECTS			Overview of user-monitored objects
DEFINED PARAMETER			Overview of the monitoring parameters and
			monitored objects defined for the individual
			monitoring programs
ACTIVE PARAMETER			Overview of the monitoring parameters and
			monitored objects defined for the individual
			monitoring programs
STATUS TABLE			Status of the SM2 system tasks and of the
			subsystems used by SM2
SELECTED HOSTS			Overview of the hosts selected using the SELECT-
			HOSTS statement
Displaying follow-up screens to information screens
Entry			Meaning
' +'	or key	[K3] or [DUE	Page forward
' -'	or key	[K1]	Page backward (if you page backward from the first page,
			the first page is output again)
' - -'			Page back to the first page
' END'			Terminate output of follow-on screens

All other entries have the same effect as ’+’.

The scroll commands can also be used to output the information screens of various hosts.

Note

It is not possible to page in batch and procedure modes. All follow-on screens are always output.

U3585-J-Z125-8-76 205