Siemens U3585-J-Z125-8-76 1, SM2 monitoring system manual NPS3021, Open-Mode=Extend

Messages	NPS3021
NPS3021	SM2U1 HANDLES SM2 LOGGING FILES
NPS3022	FILE(S) ’(&00)’ TRANSFERED TO OUTPUT FILE
NPS3023	SM2U1 HANDLES USER LOGGING FILES
NPS3024	SPECIFIED ’LAST-INDEX=(&00)’ GREATER THAN HIGHEST FILE INDEX ’(&01)’. OPERAND
	’*LAST’ ASSUMED
	Meaning
	The specified LAST-INDEX value in the //SEPARATE-FILES statement is greater than the
	highest file index (&01) in the input file. All the data up to the end of the input file will be
	transferred to the output file.
NPS3025	SPECIFIED ’FIRST-INDEX=(&00)’ GREATER THAN HIGHEST FILE INDEX ’(&01)’ IN INPUT
	FILE
	Meaning
	The specified FIRST-INDEX value in the //SEPARATE-FILES statement is greater than the
	highest file index (&01) in the input file.
	No files have been transferred to the output file.
NPS3026	OUTPUT FILE ’(&00)’ IS NOT USER LOGGING FILE
	Meaning
	This message can occur only when an existing output file is to be extended
	(OPEN-MODE=EXTEND).
NPS3027	/SET-FILE-LINK COMMAND WITH ’LINK-NAME=(&00)’ MISSING FOR OUTPUT FILE
NPS3028	/SET-FILE-LINK COMMAND WITH ’LINK=(&00)’ MISSING FOR INPUT FILE
NPS3029	VALUE FOR ’LAST-INDEX’ SMALLER THAN VALUE FOR ’FIRST-INDEX’
NPS3030	FILE INDEX VALUES OF BLOCKS ARE NOT IN ASCENDING ORDER
NPS3031	ONLY ’BUFFER-LENGTH=*STD(SIZE=16)’ PERMITTED FOR OUTPUT FILE ’(&00)’.
	Meaning
	Output files are only permitted with ’BUFFER-LENGTH=*STD(SIZE=16)’.
	The value of the BUFFER-LENGTH operand in the /ADD-FILE-LINK command for the
	output file is invalid or the existing output file (OPEN-MODE=EXTEND) has a wrong
	BUFFER-LENGTH.
	Response
	Retry the /ADD-FILE-LINK command without operand BUFFER-LENGTH or convert the
	existing output file with SM2U1.
NPS4102	SPECIFIED TIMES IN DEFINITION OF ANALYSIS INTERVAL NOT IN ASCENDING ORDER
	(B) Routing code: R Weight: 99

Meaning

The start time output for the analysis interval is greater than the corresponding end time.

U3585-J-Z125-8-76 393