Siemens SM2 monitoring system manual Select-Symmetrix-Controller, Select Symmetrix controllers

SELECT-SYMMETRIX-CONTROLLER Statements for nonprivileged users

SELECT-SYMMETRIX-CONTROLLER

Select SYMMETRIX controllers

Function

This statement is used to select up to 16 SYMMETRIX controllers to be displayed in the SYMMETRIX CONTROLLER report.

For each selected controller, a SYMMETRIX DEVICE report is then output containing monitored data on the individual devices supported by the controller.

Format

Operation	Operands
SELECT-SYMMETRIX-
CONTROLLER	 controller-mn			
	[ADD-CONTROLLER-MN = 	(controller-mn1[,controller-mn2]...)		 ]
				
			 controller-mn		
					 
					 
	[,REMOVE-CONTROLLER-MN = 		 (controller-mn1[,controller-mn2]...)		  ]
					
		 *ALL			
					

Operands

ADD-CONTROLLER-MN

=controller-mn	Defines the controllers for which SYMMETRIX DEVICE reports are
	to be output using the first controller mnemonic of the emulated
	3860 controllers.
	In all SM2 output, both controller mnemonics of an emulated 3860
	controller are always output separated by a slash.
	The following two mnemonic variants are available:
	–	alphanum-name 2..2
	–	x-text 4..4

In this statement, you need only specify the first controller mnemonic. It is possible to define up to 16 controller mnemonics.

180 U3585-J-Z125-8-76