Type = *TCP-IP, Type = *TLM | Siemens SM2 monitoring system instruction

START-MEASUREMENT-PROGRAM

Statements for SM2 administrators

TYPE = *TASK

Starts the TASK monitoring program.

TYPE = *TCP-IP

Starts the TCP-IP monitoring program.

TYPE = *TLM

Starts the TLM monitoring program.

TYPE = *UTM

Starts the UTM monitoring program.

TYPE = *VM

Starts the VM monitoring program.

Notes

–For the BCAM-CONNECTION, CHANNEL-IO, COSMOS, DISK, DISK-FILE, FILE, ISAM, PERIODIC-TASK, RESPONSETIME, SERVICETIME, SYSSTAT and TASK monitoring programs, the monitoring parameters/monitored objects must be deﬁned using the appropriate statements before the program is started.

–For further information on the monitoring programs, see page 33 ff.

Restriction

With SR2000, monitored data cannot be collected for the GS and GSVOL monitoring programs.

146	U3585-J-Z125-8-76

Page 146

Image 146

Siemens SM2 monitoring system, U3585-J-Z125-8-76 1 manual Type = *TCP-IP, Type = *TLM, Type = *UTM, Type = *VM

Contents

Preface Brief description of the SM2 monitoring system Summary of contents Target group Summary of contents Volume 2 Analysis and Display of SM2 Monitored Data SM2 Changes made since the last version of the manualChanges made since the last version Preface Changes made since the last version SET-TASK-PARAMETER SET-SERVICETIME-PARAMETERSET/MODIFY-COSMOS-PARAMETER SHOW-ACTIVE/DEFINED-PARAMETER SM2U1 Notational conventionsNotational conventions SM2R1 Readme ﬁle Readme ﬁle Preface SM2 monitoring program Overview Overview SM2 monitoring program SM2 SM2 operating modes Operating modes/users Privileged users UsersOperating modes/users SM2 monitoring program Nonprivileged users Table of authorizations Authorization table USER-ADMISSION Activating a monitoring taskActivating the monitoring task Acquisition of monitored data Acquisition of monitored data BS2000 Acquisition of monitored data SM2 monitoring program Online monitoring cycle Monitoring cycleMonitoring cycle SM2 Measurement Status Outputting and saving monitored data Outputting and saving monitored data SM2 monitoring program Methods used for compressed output of monitored data Uninterruptible clock resettingOutputting and saving monitored data Monitored variable Description SM2 monitored variablesSM2 monitored variables SM2 monitoring program SM2 monitored variables IOs Memory VM2000 Analyzing monitored data Analyzing monitored data SM2 monitoring program Performance expectations of the user Interactive mode criteriaPerformance expectations of the user Performance expectations of the user SM2 monitoring program Batch processing criteria Trend monitoring Using SM2 for system monitoringSystem monitoring System monitoring SM2 monitoring program Bottleneck analysis Basic procedure for ensuring efﬁcient DP system usage Efficient DP system usage SM2 in computer networks SM2 monitoring program Prerequisites for using SM2 in computer networks14 SM2 in computer networks Selecting hosts with SM2 Screen output SM2 in computer networksUsers in a computer network Standard SM2 output ﬁle Dynamic IO reconﬁguration SM2 monitoring programs Overview SM2 monitoring programs BCAM-CONNECTION Privileged SM2 monitoring programsMonitored data on connection sets Both LocalRemote Examples of monitoring program deﬁnitions CHANNEL-IO Monitored data on the channel loadMonitored data on the catalog management system Monitored data on DAB activities Monitored data on disk accessMonitored data on the system for bottleneck analysis Cosmos DISK-FILE Monitored data on ﬁle access for selected disksMonitored data on lock requests Monitored data on volumes in global storage Monitored data on ﬁle access for selected ﬁlesMonitored data on access to global storage Monitored data on ﬁle migration Monitored data on network devices Monitored data on Isam poolsMonitored data on communication between hosts Monitored data on Hiplex Mscf PCA Monitored data on 3419/21 disk controllers under PCAMonitored data on tasks PFA Monitored data on caches under User PFAMonitored data on Posix Monitored data on the Bcam pool Responsetime Example Calculating the time values Example Responses to a /SHOW-FILE-ATTRIBUTES command Connection-speciﬁc parameters Examples of the Responsetime monitoring program Monitored data on the service time Servicetime SVC Monitored data on SVC callsGlobal system and category-speciﬁc monitored data Task Task-speciﬁc monitored dataMonitored data on TCP/IP connections TLM Monitored data on locksMonitored data on UTM applications CPU shares of virtual machines MODIFY-ACCOUNTING-PARAMETERS SET-RECORD-TYPE=UTMA Monitored data on ﬁle access Nonprivileged SM2 monitoring programs Task Format Starting and terminating SM2Starting the program Operands Monjv = *NONE Terminating the programMonjv = CPU-LIMIT = Overview of SM2 operation START-SM2 CALL-ADMINISTRATION-PART Typical SM2 run SM2 operation Statements for deﬁning monitoring programs Statements for SM2 administratorsStatements for SM2 adminstrators ADD-BCAM-CONNECTION-SET INITIATE-COSMOS Statements for outputting information Statement for terminating the SM2 program Add connection set for BCAM-CONNECTION monitoring Statements for SM2 administratorsADD-BCAM-CONNECTION-SET Function CONNECTION-SELECTION = *BY-PORT-NUMBER CONNECTION-SELECTION =CONNECTION-SELECTION = *BY-NEA-NAME CONNECTION-TYPE = HOST-SELECTION = *SPECIFIED HOST-SELECTION =HOST-SELECTION = *ANY ADD-CONNECTION-SET ADD-CONNECTION-SETAdd connection set for Responsetime monitoring SET-DEFINITION = *EXCEPT-CONNECTION SET-DEFINITION =SET-DEFINITION = *BY-CONNECTION CONNECTION-SET = list-poss5 *CONNECTION CONNECTION-TYPE = ADD-COSMOS-EVENT ADD-COSMOS-EVENTDeﬁne events for monitored-data acquisition EVENT-NAME = ADD-FILE ADD-FILEDeﬁne ﬁle to be monitored FILE-NAME = ﬁlename ADD-ISAM-POOL ADD-ISAM-POOLDeﬁne Isam pool to be monitored Scope = CAT-ID = Scope = *USERUSER-ID = alphanum-name CAT-ID = *HOME-PVS CALL-ADMINISTRATION-PART CALL-ADMINISTRATION-PARTSwitch from evaluation part to administration facility CALL-ADMINISTRATION-PART CALL-EVALUATION-PART Switch from administration facility to evaluation partCALL-EVALUATION-PART CALL-EVALUATION-PART CHANGE-MEASUREMENT-PROGRAM Type = *PERIODIC-TASK Type = *SERVICETIMEType = *ISAM Type = *RESPONSETIME CLOSE-LOG-FILE CLOSE-LOG-FILEClose SM2 output ﬁle CLOSE-LOG-FILE END ENDTerminate SM2 run END INITIATE-COSMOS INITIATE-COSMOSPrepare Cosmos monitoring program INITIATE-COSMOS MODIFY-ADMINISTRATOR-ADMISSION Admit additional SM2 administrators MODIFY-COSMOS-PARAMETER MODIFY-COSMOS-PARAMETERModify parameters for Cosmos monitoring MODIFY-COSMOS-PARAMETER Title = c-string Title =Title = *UNCHANGED BUFFER-SIZE = NUMBER-OF-BUFFERS = ADDITIONAL-INFO = *CONFIGURATIONBUFFER-SIZE = *UNCHANGED NUMBER-OF-BUFFERS = *UNCHANGED Output = *STREAM-TAPE Output = *WRAP-AROUNDOutput = *TAPE TASK-SELECTION = USER-ID = Category =Category = *NOT-SPECIFIED USER-ID = *NOT-SPECIFIED EVENT-SELECTION = *ALL-BY-ADD-COSMOS-EVENT EVENT-SELECTION =EVENT-SELECTION = *UNCHANGED EVENT-SELECTION = *SPECIFIED DAB-CACHE-ID = *ANY DAB-CACHE-ID =DAB-CACHE-ID = *UNCHANGED MEMORY-CLASS = TSKI-SWITCH = *ANY TSKI-SWITCH =TSKI-SWITCH = *UNCHANGED TSKI-SWITCH = *TASK MEASUREMENT-TIME = Unload = *AT-MEASUREMENT-PROGRAM-STOPUnload = *AT-SM2-STOP MEASUREMENT-TIME = *UNCHANGED MODIFY-MEASUREMENT-PERIODS Modify SM2 monitoring cycle SAMPLING-PERIOD = ONLINE-PERIOD = *SAME-AS-OFFLINEONLINE-PERIOD = integer SAMPLING-PERIOD = *UNCHANGED MODIFY-RESPONSETIME-PARAMETER Modify parameters for Responsetime monitoring Definition = *1 Definition =Definition = *UNCHANGED Definition = *2 TRANSACTTIME-BUCKETS = *STD-LIMITS TRANSACTTIME-BUCKETS =TRANSACTTIME-BUCKETS = *UNCHANGED WAITTIME-BUCKETS = MODIFY-USER-ADMISSION Deﬁne authorizations for nonprivileged usersMODIFY-USER-ADMISSION Task = File = USER-ID = *ALLTask = *INHIBIT File = *UNCHANGED Isam = *ALLOW Isam = *INHIBIT OPEN-LOG-FILE OPEN-LOG-FILEOpen SM2 output ﬁle File = *STD BUFFER-OUTPUT = *IMMEDIATE BUFFER-OUTPUT =BUFFER-OUTPUT = *NORMAL REMOVE-BCAM-CONNECTION-SET REMOVE-BCAM-CONNECTION-SETExclude connection sets from BCAM-CONNECTION monitoring SET-NAME = SET-NAME = SET-NAME = *ALL REMOVE-CONNECTION-SETREMOVE-CONNECTION-SET REMOVE-CONNECTION-SET REMOVE-COSMOS-EVENT REMOVE-COSMOS-EVENTRemove events from Cosmos monitoring parameters EVENT-NAME = *ALL REMOVE-COSMOS-EVENT REMOVE-FILE REMOVE-FILERemove ﬁles from File monitoring parameters FILE-NAME = FILE-NAME = *ALL REMOVE-ISAM-POOL REMOVE-ISAM-POOLRemove Isam pools from Isam monitoring parameters POOL-NAME = POOL-NAME = *ALL CAT-ID = *ANY SELECT-HOSTS Deﬁne hosts for SM2 statements and screen output 111 SET-BCAM-CONNECTION-PARAMETER Deﬁne BCAM-CONNECTION monitoring parameters INPROC-BUCKETS = *UNCHANGED INPROC-BUCKETS =INPROC-BUCKETS = *STD-LIMITS OUTPROC-BUCKETS = SET-CHANNEL-IO-PARAMETER SET-CHANNEL-IO-PARAMETERDeﬁne CHANNEL-IO monitoring parameters Channels = Channels = *ALL SET-COSMOS-PARAMETER SET-COSMOS-PARAMETERDeﬁne Cosmos monitoring parameters SET-COSMOS-PARAMETER 116 Title = C’COSMOS’ Tasks are selected by means of their job name Tasks are selected by means of their category EVENT-SELECTION = *ALL-BY-ADD-COSMOS-EVENT 121 Unload = SET-DISK-PARAMETER SET-DISK-PARAMETERDeﬁne Disk monitoring parameters Devices = list-poss256 alphanum-name 2..4 with-wild SET-DISK-FILE-PARAMETER SET-DISK-FILE-PARAMETERDeﬁne DISK-FILE monitoring parameters Devices = list-poss8 alphanum-name SET-PERIODIC-TASK-PARAMETER Deﬁne PERIODIC-TASK monitoring parameters JOB-NAME = list-poss64 alphanum-name SET-RESPONSETIME-PARAMETER SET-RESPONSETIME-PARAMETERDeﬁne Responsetime monitoring parameters SET-RESPONSETIME-PARAMETER RESPONSETIME-BUCKETS = list-poss5 integer CONNECTION-NUMBER = *1024RESPONSETIME-BUCKETS = *STD-LIMITS WAITTIME-BUCKETS = *STD-LIMITS SET-SERVICETIME-PARAMETER SET-SERVICETIME-PARAMETERDeﬁne Servicetime monitoring parameters SET-SERVICETIME-PARAMETER SET-SYSSTAT-PARAMETER SET-SYSSTAT-PARAMETERDeﬁne Sysstat monitoring parameters USED-DEVICES = USED-DEVICES = *NONE SET-TASK-PARAMETER SET-TASK-PARAMETERDeﬁne Task monitoring parameters SET-TASK-PARAMETER JOB-NAME = JOB-NAME = *NOT-SPECIFIED TSN = TSN = *NOT-SPECIFIEDUSER-ID = USER-ID = *NOT-SPECIFIED JOB-CLASS = JOB-CLASS = *NOT-SPECIFIED Devices = *ALL Devices =Devices = *NONE SHOW-ACTIVE-PARAMETER SHOW-ACTIVE-PARAMETEROutput active monitoring parameters Type = *ALL Type = *ISAM SHOW-DEFINED-PARAMETER SHOW-DEFINED-PARAMETEROutput deﬁned monitoring parameters SHOW-DEFINED-PARAMETER Type = *DISK-FILE SHOW-MEASUREMENT-STATUS SHOW-MEASUREMENT-STATUSOutput monitoring status SHOW-MEASUREMENT-STATUS SHOW-SELECTED-HOSTS SHOW-SELECTED-HOSTSOutput selected hosts SHOW-SELECTED-HOSTS SHOW-SM2-STATUS Output status of SM2 system tasks From = integer From =From = *ACTUAL SHOW-USER-MEASURED-OBJECTS SHOW-USER-MEASURED-OBJECTSOutput monitored objects and associated users SHOW-USER-MEASURED-OBJECTS START-MEASUREMENT-PROGRAM Start monitoring program run Type = *GSVOL Type = *DLMType = *GS Type = *HSMS Type = *UTM Type = *TCP-IPType = *TLM Type = *VM STOP-MEASUREMENT-PROGRAM STOP-MEASUREMENT-PROGRAMTerminate monitoring program run STOP-MEASUREMENT-PROGRAM Terminates the DISK-FILE monitoring program Terminates the Sysstat monitoring program Statements for nonprivileged users SM2 operation Default values for statementsStatements for nonprivileged users Statements for selecting monitored data for screen output Statements for nonprivileged users Statements for controlling reports Statements for nonprivileged users SM2 operation Starting report output Input during monitoring 154 155 General statements Break Switch to system modeBreak CHANGE-ISAM-STATISTICS CHANGE-ISAM-STATISTICSInclude and exclude Isam pools ADD-POOL = *HOST-SYSTEM =*NONEScope =*USER Device DeviceSelect devices with monitored data Disk ALL Monitoring cycle Terminate monitoring Name FileMonitor ﬁles Stats Help HelpRequest user help information Output Deﬁne output modeOutput Interval =CONTROLLED Remark RemarkInsert remarks Report ReportSelect reports STD 170 With SR2000, the GS and Gsvol reports are not available Restart RestartStart output of selected reports SELECT-DAB-CACHE SELECT-DAB-CACHESelect DAB cache ADD-CACHE-ID SELECT-PCA-CACHE SELECT-PCA-CACHESelect cache for PCA Device report Cache CACHE-ID=*ALL SELECT-PCA-CONTROLLER SELECT-PCA-CONTROLLERSelect controllers for PCA Cache report Controller OUTPUT-INFORMATION SELECT-PERIODIC-TASK-PARAMETERSELECT-PERIODIC-TASK-PARAMETER =SERVICE-UNITS, CPU, IO, UPG, PAGING-READ Sort SELECT-PFA-CACHE SELECT-PFA-CACHESelect PFA cache SELECT-SYMMETRIX-CONTROLLER SELECT-SYMMETRIX-CONTROLLERSelect Symmetrix controllers ADD-CONTROLLER-MN REMOVE-CONTROLLER-MN SELECT-UTM-APPLICATION SELECT-UTM-APPLICATIONSelect UTM applications ADD-APPLICATION Output monitored objects Type =TASK Start StartStart report output START-ISAM-STATISTICS START-ISAM-STATISTICSMonitor Isam pools TSN= PoolPOOL-NAME Status Status STOP-ISAM-STATISTICS STOP-ISAM-STATISTICSTerminate monitoring of Isam pools BS2000 commands for activating user task monitoring Activating user task monitoring TSN = *OWN FormatsActivating user task monitoring SM2 operation START-TASK-MEASUREMENT SVC-STATISTICS = PCOUNTER-INTERVAL =PCOUNTER-INTERVAL = *NONE SVC-STATISTICS = *OFF Command return codes SC2 SC1 Maincode Meaning/guaranteed messages Attributes of the user-speciﬁc SM2 output ﬁle File =*STD File =*BY-LINK-NAME Activating user task monitoring SM2 operation Introduction Writing to the SM2 output ﬁleSM2 output file Attributes of the SM2 output ﬁle SM2 output ﬁle SM2 operation BLOCK-CONTROL-INFO= *WITHIN-DATA-BLOCK Managing the SM2 output ﬁle PAM output ﬁle SM2 output ﬁle SM2 operation SAM output ﬁle Opening and closing the SM2 output ﬁle SM2 monitoring program examples Examples Examples SM2 operation SM2 screen output SM2 reports SM2 screen output SM2 reports Overview of the utilization of Symmetrix controllers for Displaying follow-up screens to information screens SM2 information screensMeasurement Status Samples SM2 information screens SM2 screen outputCycle Representation of values in SM2 output screens Output sequence Report name Identiﬁers Output sequence Report output SM2 reports ACF reportACF report Monitoring information Resource Utilization in Last Interval Activity report Activity report SIH CPU UtilizationTPR Idle Rdact PCS DataSract IO’S PER SEC SYS Activity report SM2 reportsTasks Current Task Type #-TASKS CPU-Q Tasks in Scheduler Queues#-ACT IO-Q WS-ACT MemoryNPP WS-WACT Posix Data Response Statistics Bcam Connection report Bcam Connection report SM2 reports Bcam Connection report Category report Category report SM2 reports CPU-TIME % Category reportCategory Name PAGING-IO 1/S Category Queue report SM2 reports MIN MPL MAX MPL WeightCategory Queue report Task category Category Queue report Wact Task in Scheduler QueuesACT Nadm WS-ALL PPC Category WSET-ReportCategory Wset report UPG WS-ACT PPC WS-WACT PPC Program TYPE=*CHANNEL Channel reportChannel report Channel report SM2 reports Monitoring information Multiprocessor systems CMS reportCMS report CMS report SM2 reports Resident #-BMTPageable Block QU REQ. QUSER. QU Userid QU READ-LBN ItemsRead Scan REMOTE-FILE /S Responsetime MSLOCAL-FILE /S SHARED-FILE /S Stop % CPU reportCPU report Normed Measured DAB reports DAB reports CACHE-ID DAB reportDAB report SM2 reports Size DAB report Write 1/S DAB Cache report DAB Cache report SM2 reports MED DAB Cache reportMOD Sizefix VSN / File FIRST-HP,LAST-HP 243 Device report Device report SM2 reports Print Device reportTape Other Type VolumeDevice Activity Utilization Active Program TYPE=*DISK-FILE Disk File reportDisk File report SM2 reports Filename Disk File reportWrite VSN Number Enqueue 1/S DLM reportDLM report SM2 reports Number Convert 1/S Number Grant Events 1/S DLM reportNumber Information 1/S Number Release Events 1/S Outputting monitored data in the File reports File reportsFile reports SM2 reports Privileged File Report Check File reportsWait Time Global report Global report Partition GS reportGS report SM2 reports Unit DEVICE-MN Gsvol reportGsvol report Outputting monitored data in the Isam reports Isam reportsIsam reports SM2 reports Isam reports FXD PGS SM2 Memory Report SYS Memory reportMemory report SM2 Memory Report SEL WR-Q Main Memory FramesONLY-Q SYS-GLOB # Pages in Virtual Memory CL1 Paging Area Frames TotalUsed CL2 1ST-READ Faults TotalMemory report SM2 reports Reclaims Transfers Read Transfers GS Read Calls Mscf reportMscf report SM2 reports Shortages Mscf report # Requests Request with Reply AVG TimeAVG Wait Flow State AVG Time Device Type NET Device reportNET Device report #BYTES 1/IO NSM report NSM report SM2 reports NSM report PCA reports PCA reports SM2 reports PCA reports PCA Cache report PCA Cache report SM2 reports PCA Cache report CTL DEV PCA Controller reportPCA Controller report SM2 reports #CACH PCA Controller report Device MN PCA Device reportPCA Device report SM2 reports Device VSN PCA Device report Read H-RATE % Sract 1/SEC PCS reportPCS report SM2 reports CPU SQACT% PCS reportSqpln % DUR-RO 1/SEC Periodic Task report SM2 reports Program TYPE=*PERIODIC-TASK Periodic Task report TU+TPR JOB-NAME TSNUserid TYP PFA reports PFA reports Cache ID PFA Cache reportPFA Cache report SM2 reports Cache MED RD HIT PFA Cache reportBLK Size WR HIT Controller Type 3419 3421 3860 Symmetrix PFA Controller reportPFA Controller report SM2 reports #DEV PFA Controller reportCTL MN SEC NR Posix report Posix report SM2 reports Wcache Posix reportRcache SREAD/S, SWRITE/S, FORK/S, EXEC/S Program TYPE=*RESPONSETIME Responsetime reportResponsetime report SM2 reports Responsetime report D016ZE04 SM2 Responsetime Category Cycle Think Time CONN-TYPERESP. Time TRANS. Time INPUT-LEN NR. InterRate 1/SEC OUTPUT-LEN AVG Catgory NameResponsetime #INT Rate Shared PVS report Shared PVS report Shared PVS report SM2 reports Monitoring information SVC SVC reportSVC report SUM Symmetrix reports Symmetrix reports SM2 reports Controller MN Symmetrix Controller reportSymmetrix Controller report TOT HIT Symmetrix Device report Symmetrix Device report Mnemonic name of the device TCP/IP report TCP/IP report TCP/IP report SM2 reports Monitoring information Waiting Task TLM reportTLM report Occupations UTM reports UTM reports SM2 reports APPLI-NAME UTM ReportUTM report UTM report SM2 reports TAC-CL DDP # DS #DB-CALL # TSK # User UTM Application report UTM Application report Steps with DB Total TimeTOT Time with DB Time in DB Asyn TA’S # Dial Steps# Dial TA’S Asyn Conv VM2000 report VM2000 report SM2 reports VM2000 report CPU Meas Number of CPU’S Active Parameter SM2 information screensActive Parameter Connection BCAM-CONNECTION-SETSET-NAME CHANNEL-IO Parameter Channels Output NUMBER-OF-BUFFERSADDITIONAL-INFO TASK-SELECTION DAB-CACHE-ID EIA-SVC-NUMBERIO-DEVICE MEMORY-CLASS DISK-FILE Parameter Devices File Parameter Filename LOG Tasks Isam Parameter POOL-NAMEPERIODIC-TASK Parameter USER-ID JOB-NAME Responsetime Parameter Scope SET-DEFINITION Servicetime ParameterCONNECTION-SET SET-NAME Partner Sysstat Parameter Devices Task Parameter Task Selection Defined Parameter Defined Parameter Measurement Status General administration dataTSN of SM2 Primary Administrator Measurement Status Either User Measurements Allowed Secondary Administrator AllowedStatus data on additional functions Privileged Measurements Defined CMS BcamCHA-IO COSM+ Information on the selected hosts Selected HostsSelected Hosts Task / SS Status TableStatus Table Start Time Abended RunningEnded USE Term ReasonCreate Modul By Task User Measured ObjectsUser Measured Objects Isam Parameter Pool Measuring TSN Task Parameter Measured TSNMeasured USER-ID Measuring USER-IDPage System resource utilization by SM2 External storage utilization Method based on monitoring cycle CPU utilizationSystem resource utilization Method based on samples UTM monitoring program Write task and I/O buffer Main memory utilization System resource utilization User task statistics Causes of inaccuracies Inaccuracies resulting from marginal problemsAccuracy of the SM2 data Accuracy of the SM2 data Accuracy of the SM2 data Monitoring method inaccuracies Channel utilization CPU utilizationDevice utilization Measures for reducing the error sources Special applications VM2000 Special applications1 SM2 together with VM2000 VM2000 operation on /390 architecture 349 VM2000 operation on Risc architecture VM2000/SR Channel load with BUS peripherals Volume load with installed DRVServicetime monitoring values with Symmetrix control Sample procedures Sample procedures 353 354 355 356 357 358 359 360 Variables reports Table of monitored variables Monitored variables Reports on monitored variables 363 Page Meaning Response NPC0055 Messages START-MEASUREMENT-PROGRAM Cosmos NPC0061 WRAP-AROUND NPC0068 MessagesLINK=COSFIL NPC0074 NPS0002 Messages NPS0015 NPS0025 Messages NPS0033 NPS0040 Class SW-MONITOR-ADMINISTRATION NPS0048 NPS0053 Messages NPS0065 NPS0502 Messages NPS0515 NPS0521 Messages BUFFER-LENGTH NPS0528 Check and correct monitoring program deﬁnition NPS0533 Messages NPS0540 NPS0545 Messages NPS0551 NPS0559 Messages NPS0564 NPS0569 Messages NPS0577 NPS0600 Messages Macro returns &00 NPS3004 NPS3013 Messages NPS3021 OPEN-MODE=EXTEND NPS4139 Messages NPS4310 NPS4317 NPS4354 NPS4553 Messages NPS4652 NPS4801 SM2R1 SYSLNK.SM2.130 SM2SM2U1 SRMLNK.SM2.130 Activating the syntax ﬁle Installation procedureInstallation MODIFY-MSG-FILE-ASSIGNMENT Creating a new Dssm catalog Writing to the Dssm conﬁguration ﬁle Loading and unloading the subsystem Data types SDF syntax descriptionMetasyntax SDF syntax description Appendix Sufﬁxes for data types SDF syntax description Metasyntax Representation Meaning Examples Representation Meaning Examples GUIDANCE-MODE = *NO / *YES Data types Character set Special rules Data type Character set Special rules 411 412 Product-version Input format Vnn.nann Period Single quote 414 Suffixes for data types Sufﬁxes for data types Meaning Sufﬁx Meaning 417 418 419 AAD AB1AB2 D.XYA ABD D.XYB BAF F.XYA BBF F.XYB 421 Format description ISP syntax descriptionISP syntax description Appendix ISP syntax description Length of the statements SM2 statements overview Appendix Overview of statements for the SM2 administratorOverview of SM2 statements SM2 statements overview 426 427 428 429 430 431 432 433 434 435 436 AppendixSM2 statements overview Switch to system modeOverview of statements for the nonprivileged user Activate and deactivate Isam pools Monitor ﬁles Deﬁne output modeTerminate monitoring Call user help functions Select DAB cache area Select reportsStart output of selected reports Select cache area for PCA Device report Select controllers for PCA Cache report Select PFA cache area Output monitored objects Select Symmetrix controllersSelect UTM applications Start report output Deactivate all activated Isam pools Monitor Isam poolsDetermine monitoring status Activation decision ModeActivation Background storage Caching Glossary Channels Counting of I/O operations and their duration Deactivation, forced deactivation CPU time and CPU service units on SR2000Glossary Dwell time Glossary Dilation factorDMS I/O operations Expanded storage ES ﬁrmware service time DCSExcp Glossary Global storage GS Hardware service time DCSHardware service time non-DCS Hiperﬁle concept Overall performance Glossary InteractionMain memory Glossary Fault Glossary Paging in BS2000 Paging rate Paging I/O operationsPaging memory Path info Response time Risc modeGlossary Processor states Service times deﬁnition DCS, I/O operations Glossary SDV Start Device Task queues Software service time DCSSoftware service time non-DCS Time equivalent for the housekeeping performance Glossary Time equivalent for the productive performance Transaction Glossary Virtual address space subdivision Page List of Figures Page List of Tables Page Related publications BS2000/OSD-BC V3.0 DMS Macros Hiplex Mscf V2.0A BS2000/OSD Multiprocessor System BS2000/OSD-BC V3.0 Performance Handbook SM2-PA V2.0A BS2000/OSD SM2 Program Analyzer User Guide BS2000/OSD-BC System Installation User GuideRelated publications BS2000/OSD-BC Generating and Handling Applications User Guide Related publicationsVirtual Machine System User Guide Concepts and Functions User Guide 13 BS2000/OSD-BC V4.0 Commands, Volume 1, a C User Guide 15 BS2000/OSD-BC V4.0 Commands, Volume 3, MOD-J R User Guide 17 BS2000/OSD-BC V4.0 Commands, Volume 5, SH-P Z User Guide SDF-P-BASYS V2.1A OSD-SVP SR2000 Operation and Administration User GuideRelated publications 18 BS2000/OSD-BC User Reference Manual SHC-OSD V2.0A BS2000/OSD Symmetrix Host Component User Guide Srdf Related publications 23 BS2000/OSD Spool Index Index Disk controllers with cache File DCS Hiplex Mscf Nonprivileged monitoring program MIN MPL Index 483 PGE task 485 SENSE-SDV 487 Index 489 Index Contents Contents CHANGE-MEASUREMENT-PROGRAM MODIFY-ADMINISTRATOR-ADMISSIONCALL-EVALUATION-PART CLOSE-LOG-FILE SET-SYSSTAT-PARAMETER SET-PERIODIC-TASK-PARAMETERSET-RESPONSETIME-PARAMETER SHOW-ACTIVE-PARAMETER SM2 screen output 201 PCA Controller report 276 365 339361 401Page Software Monitor Volume 1 Administration and Operation Edition August Fax 0 89 6 36-4 04

Siemens SM2 monitoring system manual Type = TCP-IP, Type = TLM, Type = UTM, Type = VM

Models: SM2 monitoring system U3585-J-Z125-8-76 1

Statements for SM2 administrators

TYPE = *TASK

TYPE = *TCP-IP

TYPE = *TLM

TYPE = *UTM

TYPE = *VM