NPS0551 | Siemens U3585-J-Z125-8-76 1, SM2 monitoring system

Messages

NPS0551

NPS0551 WARNING: 64 DEVICES SELECTED FOR TASK STATISTICS. SURPLUS DEVICES IGNORED

(B) Routing code: R Weight: 50

Meaning

More than 64 devices were selected by the DEVICE deﬁnition in the //SET-TASK- PARAMETER statement. As the number of devices that can be monitored is limited to 64, collection of task statistics begins with exactly 64 devices and any surplus devices are not monitored.

The criteria for selecting these 64 devices are described in the BS2000 manual ’SM2’.

NPS0552 ’/HOLD-SUBSYSTEM’ NOT SUPPORTED BY SM2. REASON FOR FOLLOWING DSSM MESSAGES

Response

Instead of /HOLD-SUBSYSTEM command use /STOP-SUBSYSTEM command.

NPS0553 START OF SM2 SUBSYSTEM NOT POSSIBLE

(B) Routing code: R Weight: 50

Meaning

Possible reasons:

-SM2 has not been declared in the subsystem catalog.

-The installed SM2 version is not compatible with the BS2000 version.

-A required ﬁle (e.g. the SM2 module library) is missing.

NPS0554 FUNCTION NOT EXECUTED BECAUSE SUBSYSTEM SM2 IN STATE ’IN HOLD’, ’IN DELETE’ OR ALREADY DELETED

Meaning

The system administrator has held or stopped the SM2 subsystem.

As a result, a number of SM2 functions can no longer be executed.

Response

Repeat the function as soon as SM2 is available again.

NPS0555 VERSION OF SM2 MODULE LIBRARY IS (&00)

(B) Routing code: R Weight: 50

NPS0558 SM2 LOGGING FILE ALREADY OPEN. STATEMENT REJECTED

Meaning

A non-standard SM2 logging ﬁle with the speciﬁed name has already been opened.

U3585-J-Z125-8-76

385

Image 385

Siemens U3585-J-Z125-8-76 1, SM2 monitoring system manual NPS0551

Contents

Brief description of the SM2 monitoring system Preface Target group Summary of contents Volume 2 Analysis and Display of SM2 Monitored Data Summary of contents Changes made since the last version Preface Changes made since the last version of the manualSM2 Changes made since the last version SET/MODIFY-COSMOS-PARAMETER SET-SERVICETIME-PARAMETERSET-TASK-PARAMETER SHOW-ACTIVE/DEFINED-PARAMETER Notational conventions Notational conventionsSM2U1 SM2R1 Readme ﬁle Preface Readme ﬁle Overview SM2 monitoring program SM2 Overview SM2 monitoring program Operating modes/users SM2 operating modes Operating modes/users SM2 monitoring program UsersPrivileged users Nonprivileged users Authorization table Table of authorizations Activating the monitoring task Activating a monitoring taskUSER-ADMISSION Acquisition of monitored data Acquisition of monitored data Acquisition of monitored data SM2 monitoring program BS2000 Monitoring cycle Monitoring cycleOnline monitoring cycle SM2 Measurement Status Outputting and saving monitored data SM2 monitoring program Outputting and saving monitored data Outputting and saving monitored data Uninterruptible clock resettingMethods used for compressed output of monitored data SM2 monitored variables SM2 monitoring program SM2 monitored variablesMonitored variable Description IOs SM2 monitored variables Memory VM2000 Analyzing monitored data SM2 monitoring program Analyzing monitored data Performance expectations of the user Interactive mode criteriaPerformance expectations of the user Batch processing criteria Performance expectations of the user SM2 monitoring program System monitoring Using SM2 for system monitoringTrend monitoring System monitoring SM2 monitoring program Bottleneck analysis Efficient DP system usage Basic procedure for ensuring efﬁcient DP system usage 14 SM2 in computer networks Prerequisites for using SM2 in computer networksSM2 in computer networks SM2 monitoring program Selecting hosts with SM2 Users in a computer network SM2 in computer networksScreen output Standard SM2 output ﬁle Dynamic IO reconﬁguration SM2 monitoring programs Overview SM2 monitoring programs Monitored data on connection sets Privileged SM2 monitoring programsBCAM-CONNECTION Remote LocalBoth Examples of monitoring program deﬁnitions Monitored data on the catalog management system Monitored data on the channel loadCHANNEL-IO Monitored data on the system for bottleneck analysis Monitored data on disk accessMonitored data on DAB activities Cosmos Monitored data on lock requests Monitored data on ﬁle access for selected disksDISK-FILE Monitored data on access to global storage Monitored data on ﬁle access for selected ﬁlesMonitored data on volumes in global storage Monitored data on ﬁle migration Monitored data on communication between hosts Monitored data on Isam poolsMonitored data on network devices Monitored data on Hiplex Mscf Monitored data on tasks Monitored data on 3419/21 disk controllers under PCAPCA Monitored data on Posix Monitored data on caches under User PFAPFA Responsetime Monitored data on the Bcam pool Example Calculating the time values Example Responses to a /SHOW-FILE-ATTRIBUTES command Connection-speciﬁc parameters Examples of the Responsetime monitoring program Servicetime Monitored data on the service time Global system and category-speciﬁc monitored data Monitored data on SVC callsSVC Monitored data on TCP/IP connections Task-speciﬁc monitored dataTask Monitored data on UTM applications Monitored data on locksTLM MODIFY-ACCOUNTING-PARAMETERS SET-RECORD-TYPE=UTMA CPU shares of virtual machines Nonprivileged SM2 monitoring programs Monitored data on ﬁle access Task Starting the program Starting and terminating SM2Format Operands Monjv = Terminating the programMonjv = *NONE CPU-LIMIT = Overview of SM2 operation Typical SM2 run SM2 operation START-SM2 CALL-ADMINISTRATION-PART Statements for SM2 adminstrators Statements for SM2 administratorsStatements for deﬁning monitoring programs ADD-BCAM-CONNECTION-SET INITIATE-COSMOS Statements for outputting information Statement for terminating the SM2 program ADD-BCAM-CONNECTION-SET Statements for SM2 administratorsAdd connection set for BCAM-CONNECTION monitoring Function CONNECTION-SELECTION = *BY-NEA-NAME CONNECTION-SELECTION =CONNECTION-SELECTION = *BY-PORT-NUMBER CONNECTION-TYPE = HOST-SELECTION = *ANY HOST-SELECTION =HOST-SELECTION = *SPECIFIED Add connection set for Responsetime monitoring ADD-CONNECTION-SETADD-CONNECTION-SET SET-DEFINITION = *BY-CONNECTION SET-DEFINITION =SET-DEFINITION = *EXCEPT-CONNECTION CONNECTION-SET = list-poss5 *CONNECTION CONNECTION-TYPE = Deﬁne events for monitored-data acquisition ADD-COSMOS-EVENTADD-COSMOS-EVENT EVENT-NAME = Deﬁne ﬁle to be monitored ADD-FILEADD-FILE FILE-NAME = ﬁlename Deﬁne Isam pool to be monitored ADD-ISAM-POOLADD-ISAM-POOL Scope = USER-ID = alphanum-name Scope = *USERCAT-ID = CAT-ID = *HOME-PVS Switch from evaluation part to administration facility CALL-ADMINISTRATION-PARTCALL-ADMINISTRATION-PART CALL-ADMINISTRATION-PART CALL-EVALUATION-PART Switch from administration facility to evaluation partCALL-EVALUATION-PART CALL-EVALUATION-PART CHANGE-MEASUREMENT-PROGRAM Type = *ISAM Type = *SERVICETIMEType = *PERIODIC-TASK Type = *RESPONSETIME Close SM2 output ﬁle CLOSE-LOG-FILECLOSE-LOG-FILE CLOSE-LOG-FILE Terminate SM2 run ENDEND END Prepare Cosmos monitoring program INITIATE-COSMOSINITIATE-COSMOS INITIATE-COSMOS Admit additional SM2 administrators MODIFY-ADMINISTRATOR-ADMISSION Modify parameters for Cosmos monitoring MODIFY-COSMOS-PARAMETERMODIFY-COSMOS-PARAMETER MODIFY-COSMOS-PARAMETER Title = *UNCHANGED Title =Title = c-string BUFFER-SIZE = BUFFER-SIZE = *UNCHANGED ADDITIONAL-INFO = *CONFIGURATIONNUMBER-OF-BUFFERS = NUMBER-OF-BUFFERS = *UNCHANGED Output = *TAPE Output = *WRAP-AROUNDOutput = *STREAM-TAPE TASK-SELECTION = Category = *NOT-SPECIFIED Category =USER-ID = USER-ID = *NOT-SPECIFIED EVENT-SELECTION = *UNCHANGED EVENT-SELECTION =EVENT-SELECTION = *ALL-BY-ADD-COSMOS-EVENT EVENT-SELECTION = *SPECIFIED DAB-CACHE-ID = *UNCHANGED DAB-CACHE-ID =DAB-CACHE-ID = *ANY MEMORY-CLASS = TSKI-SWITCH = *UNCHANGED TSKI-SWITCH =TSKI-SWITCH = *ANY TSKI-SWITCH = *TASK Unload = *AT-SM2-STOP Unload = *AT-MEASUREMENT-PROGRAM-STOPMEASUREMENT-TIME = MEASUREMENT-TIME = *UNCHANGED Modify SM2 monitoring cycle MODIFY-MEASUREMENT-PERIODS ONLINE-PERIOD = integer ONLINE-PERIOD = *SAME-AS-OFFLINESAMPLING-PERIOD = SAMPLING-PERIOD = *UNCHANGED Modify parameters for Responsetime monitoring MODIFY-RESPONSETIME-PARAMETER Definition = *UNCHANGED Definition =Definition = *1 Definition = *2 TRANSACTTIME-BUCKETS = *UNCHANGED TRANSACTTIME-BUCKETS =TRANSACTTIME-BUCKETS = *STD-LIMITS WAITTIME-BUCKETS = MODIFY-USER-ADMISSION Deﬁne authorizations for nonprivileged usersMODIFY-USER-ADMISSION Task = Task = *INHIBIT USER-ID = *ALLFile = File = *UNCHANGED Isam = *INHIBIT Isam = *ALLOW Open SM2 output ﬁle OPEN-LOG-FILEOPEN-LOG-FILE File = *STD BUFFER-OUTPUT = *NORMAL BUFFER-OUTPUT =BUFFER-OUTPUT = *IMMEDIATE Exclude connection sets from BCAM-CONNECTION monitoring REMOVE-BCAM-CONNECTION-SETREMOVE-BCAM-CONNECTION-SET SET-NAME = REMOVE-CONNECTION-SET REMOVE-CONNECTION-SETSET-NAME = SET-NAME = *ALL REMOVE-CONNECTION-SET Remove events from Cosmos monitoring parameters REMOVE-COSMOS-EVENTREMOVE-COSMOS-EVENT EVENT-NAME = *ALL REMOVE-COSMOS-EVENT Remove ﬁles from File monitoring parameters REMOVE-FILEREMOVE-FILE FILE-NAME = FILE-NAME = *ALL Remove Isam pools from Isam monitoring parameters REMOVE-ISAM-POOLREMOVE-ISAM-POOL POOL-NAME = POOL-NAME = *ALL CAT-ID = *ANY Deﬁne hosts for SM2 statements and screen output SELECT-HOSTS 111 Deﬁne BCAM-CONNECTION monitoring parameters SET-BCAM-CONNECTION-PARAMETER INPROC-BUCKETS = *STD-LIMITS INPROC-BUCKETS =INPROC-BUCKETS = *UNCHANGED OUTPROC-BUCKETS = Deﬁne CHANNEL-IO monitoring parameters SET-CHANNEL-IO-PARAMETERSET-CHANNEL-IO-PARAMETER Channels = Channels = *ALL Deﬁne Cosmos monitoring parameters SET-COSMOS-PARAMETERSET-COSMOS-PARAMETER SET-COSMOS-PARAMETER 116 Title = C’COSMOS’ Tasks are selected by means of their job name Tasks are selected by means of their category EVENT-SELECTION = *ALL-BY-ADD-COSMOS-EVENT 121 Unload = Deﬁne Disk monitoring parameters SET-DISK-PARAMETERSET-DISK-PARAMETER Devices = list-poss256 alphanum-name 2..4 with-wild Deﬁne DISK-FILE monitoring parameters SET-DISK-FILE-PARAMETERSET-DISK-FILE-PARAMETER Devices = list-poss8 alphanum-name Deﬁne PERIODIC-TASK monitoring parameters SET-PERIODIC-TASK-PARAMETER JOB-NAME = list-poss64 alphanum-name Deﬁne Responsetime monitoring parameters SET-RESPONSETIME-PARAMETERSET-RESPONSETIME-PARAMETER SET-RESPONSETIME-PARAMETER RESPONSETIME-BUCKETS = *STD-LIMITS CONNECTION-NUMBER = *1024RESPONSETIME-BUCKETS = list-poss5 integer WAITTIME-BUCKETS = *STD-LIMITS Deﬁne Servicetime monitoring parameters SET-SERVICETIME-PARAMETERSET-SERVICETIME-PARAMETER SET-SERVICETIME-PARAMETER Deﬁne Sysstat monitoring parameters SET-SYSSTAT-PARAMETERSET-SYSSTAT-PARAMETER USED-DEVICES = USED-DEVICES = *NONE Deﬁne Task monitoring parameters SET-TASK-PARAMETERSET-TASK-PARAMETER SET-TASK-PARAMETER USER-ID = USER-ID = *NOT-SPECIFIED TSN = TSN = *NOT-SPECIFIEDJOB-NAME = JOB-NAME = *NOT-SPECIFIED JOB-CLASS = JOB-CLASS = *NOT-SPECIFIED Devices = *NONE Devices =Devices = *ALL Output active monitoring parameters SHOW-ACTIVE-PARAMETERSHOW-ACTIVE-PARAMETER Type = *ALL Type = *ISAM Output deﬁned monitoring parameters SHOW-DEFINED-PARAMETERSHOW-DEFINED-PARAMETER SHOW-DEFINED-PARAMETER Type = *DISK-FILE Output monitoring status SHOW-MEASUREMENT-STATUSSHOW-MEASUREMENT-STATUS SHOW-MEASUREMENT-STATUS Output selected hosts SHOW-SELECTED-HOSTSSHOW-SELECTED-HOSTS SHOW-SELECTED-HOSTS Output status of SM2 system tasks SHOW-SM2-STATUS From = *ACTUAL From =From = integer Output monitored objects and associated users SHOW-USER-MEASURED-OBJECTSSHOW-USER-MEASURED-OBJECTS SHOW-USER-MEASURED-OBJECTS Start monitoring program run START-MEASUREMENT-PROGRAM Type = *GS Type = *DLMType = *GSVOL Type = *HSMS Type = *TLM Type = *TCP-IPType = *UTM Type = *VM Terminate monitoring program run STOP-MEASUREMENT-PROGRAMSTOP-MEASUREMENT-PROGRAM STOP-MEASUREMENT-PROGRAM Terminates the DISK-FILE monitoring program Terminates the Sysstat monitoring program Statements for nonprivileged users Default values for statementsStatements for nonprivileged users SM2 operation Statements for selecting monitored data for screen output Statements for controlling reports Statements for nonprivileged users Statements for nonprivileged users SM2 operation Input during monitoring Starting report output 154 155 General statements Break Switch to system modeBreak Include and exclude Isam pools CHANGE-ISAM-STATISTICSCHANGE-ISAM-STATISTICS ADD-POOL Scope =*NONE= *HOST-SYSTEM =*USER Select devices with monitored data DeviceDevice Disk ALL Monitoring cycle Terminate monitoring Monitor ﬁles FileName Stats Request user help information HelpHelp Output Deﬁne output modeOutput =CONTROLLED Interval Insert remarks RemarkRemark Select reports ReportReport STD 170 With SR2000, the GS and Gsvol reports are not available Start output of selected reports RestartRestart Select DAB cache SELECT-DAB-CACHESELECT-DAB-CACHE ADD-CACHE-ID Select cache for PCA Device report SELECT-PCA-CACHESELECT-PCA-CACHE Cache CACHE-ID=*ALL Select controllers for PCA Cache report SELECT-PCA-CONTROLLERSELECT-PCA-CONTROLLER Controller SELECT-PERIODIC-TASK-PARAMETER SELECT-PERIODIC-TASK-PARAMETEROUTPUT-INFORMATION Sort =SERVICE-UNITS, CPU, IO, UPG, PAGING-READ Select PFA cache SELECT-PFA-CACHESELECT-PFA-CACHE Select Symmetrix controllers SELECT-SYMMETRIX-CONTROLLERSELECT-SYMMETRIX-CONTROLLER ADD-CONTROLLER-MN REMOVE-CONTROLLER-MN Select UTM applications SELECT-UTM-APPLICATIONSELECT-UTM-APPLICATION ADD-APPLICATION Type =TASK Output monitored objects Start report output StartStart Monitor Isam pools START-ISAM-STATISTICSSTART-ISAM-STATISTICS POOL-NAME PoolTSN= Status Status Terminate monitoring of Isam pools STOP-ISAM-STATISTICSSTOP-ISAM-STATISTICS Activating user task monitoring BS2000 commands for activating user task monitoring Activating user task monitoring SM2 operation FormatsTSN = *OWN START-TASK-MEASUREMENT PCOUNTER-INTERVAL = *NONE PCOUNTER-INTERVAL =SVC-STATISTICS = SVC-STATISTICS = *OFF SC2 SC1 Maincode Meaning/guaranteed messages Command return codes File =*STD File =*BY-LINK-NAME Attributes of the user-speciﬁc SM2 output ﬁle Activating user task monitoring SM2 operation SM2 output file Writing to the SM2 output ﬁleIntroduction Attributes of the SM2 output ﬁle BLOCK-CONTROL-INFO= *WITHIN-DATA-BLOCK SM2 output ﬁle SM2 operation Managing the SM2 output ﬁle PAM output ﬁle Opening and closing the SM2 output ﬁle SM2 output ﬁle SM2 operation SAM output ﬁle Examples SM2 monitoring program examples Examples SM2 operation SM2 screen output SM2 reports SM2 screen output SM2 reports Overview of the utilization of Symmetrix controllers for Measurement Status SM2 information screensDisplaying follow-up screens to information screens Cycle SM2 information screens SM2 screen outputSamples Representation of values in SM2 output screens Report name Identiﬁers Output sequence Output sequence ACF report SM2 reports ACF reportReport output Monitoring information Resource Utilization in Last Interval Activity report Activity report TPR CPU UtilizationSIH Idle Sract PCS DataRdact IO’S PER SEC Tasks Current Task Type Activity report SM2 reportsSYS #-TASKS #-ACT Tasks in Scheduler QueuesCPU-Q IO-Q NPP MemoryWS-ACT WS-WACT Response Statistics Posix Data Bcam Connection report SM2 reports Bcam Connection report Bcam Connection report Category report SM2 reports Category report Category Name Category reportCPU-TIME % PAGING-IO 1/S Category Queue report MIN MPL MAX MPL WeightCategory Queue report SM2 reports Task category Category Queue report ACT Task in Scheduler QueuesWact Nadm Category Wset report Category WSET-ReportWS-ALL PPC UPG WS-WACT PPC WS-ACT PPC Channel report Channel reportProgram TYPE=*CHANNEL Channel report SM2 reports Monitoring information CMS report CMS reportMultiprocessor systems CMS report SM2 reports Pageable #-BMTResident SER. QU REQ. QUBlock QU Userid QU Read ItemsREAD-LBN Scan LOCAL-FILE /S Responsetime MSREMOTE-FILE /S SHARED-FILE /S CPU report CPU reportStop % Measured Normed DAB reports DAB reports DAB report SM2 reports DAB reportCACHE-ID Size Write 1/S DAB report DAB Cache report SM2 reports DAB Cache report MOD DAB Cache reportMED Sizefix FIRST-HP,LAST-HP VSN / File 243 Device report SM2 reports Device report Tape Device reportPrint Other Device VolumeType Activity Active Utilization Disk File report SM2 reports Disk File reportProgram TYPE=*DISK-FILE Write Disk File reportFilename VSN DLM report SM2 reports DLM reportNumber Enqueue 1/S Number Convert 1/S Number Information 1/S DLM reportNumber Grant Events 1/S Number Release Events 1/S File reports SM2 reports File reportsOutputting monitored data in the File reports Privileged File Report Wait File reportsCheck Time Global report Global report GS report SM2 reports GS reportPartition Unit Gsvol report Gsvol reportDEVICE-MN Isam reports SM2 reports Isam reportsOutputting monitored data in the Isam reports Isam reports FXD PGS Memory report Memory reportSM2 Memory Report SYS SM2 Memory Report SEL ONLY-Q Main Memory FramesWR-Q SYS-GLOB Used Paging Area Frames Total# Pages in Virtual Memory CL1 CL2 Memory report SM2 reports Faults Total1ST-READ Reclaims Transfers GS Read Transfers Read Mscf report SM2 reports Mscf reportCalls Shortages Mscf report AVG Wait Request with Reply AVG Time# Requests Flow State AVG Time NET Device report NET Device reportDevice Type #BYTES 1/IO NSM report SM2 reports NSM report NSM report PCA reports SM2 reports PCA reports PCA reports PCA Cache report SM2 reports PCA Cache report PCA Cache report PCA Controller report SM2 reports PCA Controller reportCTL DEV #CACH PCA Controller report PCA Device report SM2 reports PCA Device reportDevice MN Device VSN Read H-RATE % PCA Device report PCS report SM2 reports PCS reportSract 1/SEC CPU Sqpln % PCS reportSQACT% DUR-RO 1/SEC Program TYPE=*PERIODIC-TASK Periodic Task report SM2 reports TU+TPR Periodic Task report Userid TSNJOB-NAME TYP PFA reports PFA reports PFA Cache report SM2 reports PFA Cache reportCache ID Cache MED BLK Size PFA Cache reportRD HIT WR HIT PFA Controller report SM2 reports PFA Controller reportController Type 3419 3421 3860 Symmetrix CTL MN PFA Controller report#DEV SEC NR Posix report SM2 reports Posix report Rcache Posix reportWcache SREAD/S, SWRITE/S, FORK/S, EXEC/S Responsetime report SM2 reports Responsetime reportProgram TYPE=*RESPONSETIME Responsetime report D016ZE04 SM2 Responsetime Category Cycle RESP. Time CONN-TYPEThink Time TRANS. Time Rate 1/SEC NR. InterINPUT-LEN OUTPUT-LEN Responsetime Catgory NameAVG Rate #INT Shared PVS report Shared PVS report Shared PVS report SM2 reports Monitoring information SVC report SVC reportSVC SUM Symmetrix reports SM2 reports Symmetrix reports Symmetrix Controller report Symmetrix Controller reportController MN TOT HIT Symmetrix Device report Symmetrix Device report Mnemonic name of the device TCP/IP report TCP/IP report TCP/IP report SM2 reports Monitoring information TLM report TLM reportWaiting Task Occupations UTM reports SM2 reports UTM reports UTM report UTM ReportAPPLI-NAME TAC-CL DDP # DS #DB-CALL # TSK # User UTM report SM2 reports UTM Application report UTM Application report TOT Time with DB Total TimeSteps with DB Time in DB # Dial TA’S # Dial StepsAsyn TA’S Asyn Conv VM2000 report SM2 reports VM2000 report VM2000 report Number of CPU’S CPU Meas Active Parameter SM2 information screensActive Parameter SET-NAME BCAM-CONNECTION-SETConnection CHANNEL-IO Parameter Channels ADDITIONAL-INFO NUMBER-OF-BUFFERSOutput TASK-SELECTION IO-DEVICE EIA-SVC-NUMBERDAB-CACHE-ID MEMORY-CLASS File Parameter Filename DISK-FILE Parameter Devices PERIODIC-TASK Parameter Isam Parameter POOL-NAMELOG Tasks USER-ID JOB-NAME Responsetime Parameter Scope CONNECTION-SET SET-NAME Servicetime ParameterSET-DEFINITION Partner Task Parameter Task Selection Sysstat Parameter Devices Defined Parameter Defined Parameter TSN of SM2 Primary Administrator General administration dataMeasurement Status Measurement Status Either Status data on additional functions Secondary Administrator AllowedUser Measurements Allowed Privileged Measurements Defined CHA-IO BcamCMS COSM+ Selected Hosts Selected HostsInformation on the selected hosts Status Table Status TableTask / SS Start Time Ended RunningAbended USE Create ReasonTerm Modul User Measured Objects User Measured ObjectsBy Task Isam Parameter Pool Measured USER-ID Task Parameter Measured TSNMeasuring TSN Measuring USER-IDPage External storage utilization System resource utilization by SM2 System resource utilization CPU utilizationMethod based on monitoring cycle Method based on samples Write task and I/O buffer UTM monitoring program System resource utilization User task statistics Main memory utilization Accuracy of the SM2 data Inaccuracies resulting from marginal problemsCauses of inaccuracies Accuracy of the SM2 data Accuracy of the SM2 data Monitoring method inaccuracies Device utilization CPU utilizationChannel utilization Measures for reducing the error sources 1 SM2 together with VM2000 Special applicationsSpecial applications VM2000 VM2000 operation on /390 architecture 349 VM2000 operation on Risc architecture VM2000/SR Servicetime monitoring values with Symmetrix control Volume load with installed DRVChannel load with BUS peripherals Sample procedures Sample procedures 353 354 355 356 357 358 359 360 Table of monitored variables Variables reports Reports on monitored variables Monitored variables 363 Page Response Meaning START-MEASUREMENT-PROGRAM Cosmos NPC0055 Messages NPC0061 LINK=COSFIL NPC0068 MessagesWRAP-AROUND NPC0074 NPS0002 Messages NPS0015 NPS0025 Messages NPS0033 Class NPS0040 NPS0048 SW-MONITOR-ADMINISTRATION NPS0053 Messages NPS0065 NPS0502 Messages NPS0515 BUFFER-LENGTH NPS0521 Messages Check and correct monitoring program deﬁnition NPS0528 NPS0533 Messages NPS0540 NPS0545 Messages NPS0551 NPS0559 Messages NPS0564 NPS0569 Messages NPS0577 Macro returns &00 NPS0600 Messages NPS3004 NPS3013 Messages OPEN-MODE=EXTEND NPS3021 NPS4139 Messages NPS4310 NPS4317 NPS4354 NPS4553 Messages NPS4652 NPS4801 SM2U1 SM2SM2R1 SYSLNK.SM2.130 SRMLNK.SM2.130 Installation Installation procedureActivating the syntax ﬁle MODIFY-MSG-FILE-ASSIGNMENT Writing to the Dssm conﬁguration ﬁle Creating a new Dssm catalog Loading and unloading the subsystem Metasyntax SDF syntax descriptionData types SDF syntax description Appendix Sufﬁxes for data types Metasyntax Representation Meaning Examples SDF syntax description GUIDANCE-MODE = *NO / *YES Representation Meaning Examples Data types Character set Special rules Data type Character set Special rules 411 412 Product-version Input format Vnn.nann Period Single quote 414 Sufﬁxes for data types Meaning Suffixes for data types Sufﬁx Meaning 417 418 419 AB2 AB1AAD D.XYA ABD D.XYB BAF F.XYA BBF F.XYB 421 ISP syntax description Appendix ISP syntax descriptionFormat description Length of the statements ISP syntax description Overview of SM2 statements Overview of statements for the SM2 administratorSM2 statements overview Appendix SM2 statements overview 426 427 428 429 430 431 432 433 434 435 436 Overview of statements for the nonprivileged user Switch to system modeAppendixSM2 statements overview Activate and deactivate Isam pools Terminate monitoring Deﬁne output modeMonitor ﬁles Call user help functions Start output of selected reports Select reportsSelect DAB cache area Select cache area for PCA Device report Select PFA cache area Select controllers for PCA Cache report Select UTM applications Select Symmetrix controllersOutput monitored objects Start report output Determine monitoring status Monitor Isam poolsDeactivate all activated Isam pools Activation ModeActivation decision Caching Background storage Counting of I/O operations and their duration Glossary Channels Glossary CPU time and CPU service units on SR2000Deactivation, forced deactivation DMS I/O operations Glossary Dilation factorDwell time Excp ﬁrmware service time DCSExpanded storage ES Hardware service time non-DCS Hardware service time DCSGlossary Global storage GS Hiperﬁle concept Main memory Glossary InteractionOverall performance Glossary Fault Glossary Paging in BS2000 Paging memory Paging I/O operationsPaging rate Path info Glossary Processor states Risc modeResponse time Glossary SDV Start Device Service times deﬁnition DCS, I/O operations Software service time non-DCS Software service time DCSTask queues Time equivalent for the housekeeping performance Transaction Glossary Time equivalent for the productive performance Glossary Virtual address space subdivision Page List of Figures Page List of Tables Page BS2000/OSD-BC V3.0 DMS Macros Related publications BS2000/OSD-BC V3.0 Performance Handbook Hiplex Mscf V2.0A BS2000/OSD Multiprocessor System Related publications BS2000/OSD-BC BS2000/OSD-BC System Installation User GuideSM2-PA V2.0A BS2000/OSD SM2 Program Analyzer User Guide Virtual Machine System User Guide Related publicationsGenerating and Handling Applications User Guide Concepts and Functions User Guide 13 BS2000/OSD-BC V4.0 Commands, Volume 1, a C User Guide 15 BS2000/OSD-BC V4.0 Commands, Volume 3, MOD-J R User Guide 17 BS2000/OSD-BC V4.0 Commands, Volume 5, SH-P Z User Guide Related publications 18 BS2000/OSD-BC OSD-SVP SR2000 Operation and Administration User GuideSDF-P-BASYS V2.1A User Reference Manual Srdf SHC-OSD V2.0A BS2000/OSD Symmetrix Host Component User Guide Spool Related publications 23 BS2000/OSD Index Index Disk controllers with cache File Hiplex Mscf DCS Nonprivileged monitoring program MIN MPL Index 483 PGE task 485 SENSE-SDV 487 Index 489 Index Contents Contents CALL-EVALUATION-PART MODIFY-ADMINISTRATOR-ADMISSIONCHANGE-MEASUREMENT-PROGRAM CLOSE-LOG-FILE SET-RESPONSETIME-PARAMETER SET-PERIODIC-TASK-PARAMETERSET-SYSSTAT-PARAMETER SHOW-ACTIVE-PARAMETER SM2 screen output 201 PCA Controller report 276 361 339365 401Page Edition August Software Monitor Volume 1 Administration and Operation Fax 0 89 6 36-4 04