Siemens U3585-J-Z125-8-76 1 manual Examples of the Responsetime monitoring program

SM2 monitoring programs RESPONSETIME

This monitoring program supplies statistics for each connection set. In addition, the set of all connections is monitored on an ongoing basis. When selecting which connections are to be monitored, the SM2 administrator can define up to 15 connection sets. (*ALL,*ALL,*ALL) is always set automatically as the additional connection set. Furthermore, the SM2 admin- istrator must specify whether the selected connections are to be monitored or excluded from monitoring using the *BY-CONNECTION or *EXCEPT-CONNECTION operand of the ADD-CONNECTION-SET statement. With *EXCEPT-CONNECTION, all connections except for those in the specified connection groups are monitored.

The SM2 administrator can also specify the type of the connection. If *LOCAL is specified, connections within the host are taken into account. This makes it possible to record the response times for individual applications, even if it would normally appear to the system that everything is running under the OMNIS carrier application.

Each defined connection set can consist of a maximum of five connection groups. The total number of connection groups which can be defined is, in turn, limited to 15 at most.

Examples of the RESPONSETIME monitoring program

Example 1

SET-RESPONSETIME-PARAMETER

ADD-CONNECTION-SET SET-NAME=setname1,SET-DEFINITION=*BY-CONNECTION,

CONNECTION-SET=((utm1,*ALL,*ALL),(utm2,*ALL,*ALL),(utm3,t1,pr1))

ADD-CONNECTION-SET SET-NAME=setname2,SET-DEFINITION=*BY-CONNECTION,

CONNECTION-SET=(utm3,*ALL,*ALL),CONNECTION-TYPE=*BOTH,

ADD-CONNECTION-SET SET-NAME=setname3,SET-DEFINITION=*EXCEPT-CONNECTION,

CONNECTION-SET=((*ALL,termx*,*ALL),(omnis,*ALL,*ALL))

ADD-CONNECTION-SET SET-NAME=setname4,SET-DEFINITION=*EXCEPT-CONNECTION,

CONNECTION-SET=((utm1,*ALL,*ALL),(omnis,*ALL,*ALL),(apl1,t1,pr1))

START-MEASUREMENT-PROGRAM TYPE=*RESPONSETIME

The above statements are used to explicitly define four connection sets: the first by specifying a list of three connection groups. These three connection groups are taken as a whole. The second connection set takes account of local and remote connections. All the other connection sets only take account of remote connections (ï default setting). The third connection set defines all connections which are neither part of the OMNIS application nor belong to a partner whose name begins with “termx”. The fourth connection set combines all connections which belong to neither the UTM1 or OMNIS application nor to the explicit connection (apl1,t1,pr1).

U3585-J-Z125-8-76 49