Siemens SM2 monitoring system, U3585-J-Z125-8-76 1 manual UTM reports SM2 reports

UTM reports SM2 reports

UTM reports

These reports output application-specific data to the screen. In the following description, you should note that the terms used are the same as those used in UTM. This results in some discrepancies compared with the terms used in the RESPONSETIME reports (e.g. "transaction"). Please refer to the UTM manuals for an explanation of the terms used in UTM.

The UTM report provides an overview of all UTM applications which supply data to SM2. The decision as to whether a UTM application supplies data to SM2 is taken when the application is generated and/or by means of a statement from the UTM administrator. For further information, please refer to “UTM Monitored data on UTM applications” on page 53 and the UTM manual “Generating and Administering Applications” [10].

The UTM APPLICATION report provides detailed information on a UTM application.

The figure below illustrates the hierarchy of reports and the statement used to request them:

UTM report

SELECT-UTM-APPLICATION

UTM APPLICATION report

310 U3585-J-Z125-8-76