Siemens SM2 monitoring system, U3585-J-Z125-8-76 1 manual NPS0040, Class

NPS0040		Messages
NPS0040	SM2 STXIT: CLASS=(&00), CODE=(&01), LOCATION=(&02). PROGRAM RUN ABORTED
	(B) Routing code: R Weight: 99
	Meaning
	An error has occurred in the unprivileged program part of SM2.
	CLASS:	event class.
	CODE:	error weight.
	LOCATION: program counter of the location at which the error occurred.
	For further information on the STXIT routine see the ’Executive Macros’ manual.
NPS0041	TOO MUCH USERS WANT TO MONITOR THE SAME FILE
	Meaning
	Maximal 64 users can monitor the same file at the same time.
NPS0044	USER NOT AUTHORIZED TO MONITOR TASK. COMMAND REJECTED
	(B) Routing code: R Weight: 99
	Meaning
	The SM2 administrator has not permitted task monitoring. As a result, monitoring of the
	user task either cannot be started or can no longer be stopped by the user.
	If the user himself started the monitoring of his task by means of a
	/START-TASK-MEASUREMENT command, monitoring has already been terminated by the
	SM2 administrator.
NPS0045	TASK ALREADY BEING MONITORED BY SM2
	(B) Routing code: R Weight: 50
	Meaning
	Monitoring of the task has already been started either by the user via
	the /START-TASK-MEASUREMENT command or by the SM2 administrator.
NPS0046	TASK MONITORING NOT INITIATED BY ’/START-TASK-MEASUREMENT’. COMMAND REJECTED
	(B) Routing code: R Weight: 99
	Meaning
	Task monitoring cannot be terminated, either because it was not started by the
	/START-TASK-MEASUREMENT command or because it has already been terminated in
	the meantime (e.g. due to withdrawal of permission to monitor the task or to SM2
	shutdown).
NPS0047	SPECIFIED TASK DOES NOT EXIST
	Meaning
	A TSN was specified for which no task exists.

374 U3585-J-Z125-8-76