Siemens U3585-J-Z125-8-76 1, SM2 monitoring system manual Format, Disk ALL

Statements for nonprivileged usersDEVICE

Format

Operation	Operands
DEVICE		*DISK		
		*ALL		
						+	
		 +			[		dev-name]
					 -		
		[	dev-name]	
		 -		

Operands

*DISK

*ALL

	+	
[		dev-name] ..
	-	

dev-name

Specifies the monitored data of up to 8 disk devices with the greatest activity during the monitoring cycle.

The disk devices are sorted in descending order according to activity, and the DEVICE report includes their monitored data.

This operand is predefined at program start time. It must only be specified if the presetting has been changed but is to be reactivated.

Specifies the monitored data of up to 8 devices with the greatest activity during the monitoring cycle. The devices are sorted in descending order according to activity, and the DEVICE report includes their monitored data.

Designates devices whose monitored data is to be output separately in the DEVICE report (+) or no longer to be output (-).

In the case of the first device in an input line, the sign can be omitted. In this case this entry completely replaces the previously valid device selection, and, at the same time, the presetting goes into effect.

If the first device name in the input line is preceded by a sign, the devices of this input line are added to those previously selected or removed.

Each further device in the input line must be preceded by a sign.

Mnemonic name for the device as assigned at system generation (see the PDT - Physical Device Table).

U3585-J-Z125-8-76 161