Siemens U3585-J-Z125-8-76 1 Bcam, Cha-Io, Cms, Cosm+, Dab, Dlm, Gsvol, Isam, Mscf, Ndv, Nsm, Pca

SM2 information screens MEASUREMENT STATUS

Meaning of abbreviations for the monitoring programs:

BCAM	BCAM-CONNECTION monitoring program
CHA-IO	CHANNEL-IO monitoring program
CMS	CMS monitoring program
COSM+	COSMOS (“+” means that COSMOS has been initialized but not
	started)
DAB	DAB monitoring program
D-FILE	DISK-FILE monitoring program
DISK	DISK monitoring program
DLM	DLM monitoring program
FILE	FILE monitoring program (privileged users)
GS	GS monitoring program
GSVOL	GSVOL monitoring program
HSMS	HSMS monitoring program
ISAM	ISAM monitoring program (privileged users)
MSCF	MSCF monitoring program
NDV	NET-DEVICE monitoring program
NSM	NSM monitoring program
PCA	PCA monitoring program
PERTSK	PERIODIC-TASK monitoring program
PFA	PFA monitoring program
POSIX	POSIX monitoring program
RTIME	RESPONSETIME monitoring program
SVC	SVC monitoring program
SVTIME	SERVICETIME monitoring program
SYSTEM	SYSSTAT monitoring program
TASK	TASK monitoring program
TCPIP	TCP-IP monitoring program
TLM	TLM monitoring program
UTM	UTM monitoring program
VM	VM2000 monitoring program

Table 8: Abbreviations for monitoring programs

If a monitoring program is followed by an asterisk (e.g. PCA*), this means that the monitoring program is active as far as SM2 is concerned, but that the corresponding subsystem is currently not supplying any data (e.g. because it has not been started).

U3585-J-Z125-8-76 331