Siemens U3585-J-Z125-8-76 1, SM2 monitoring system manual 359

Notes on SM2 operation Sample procedures

4) Perform analysis with SM2R1 (SM2R1.EVALUATION)

This procedure analyzes the SM2 output file just closed.

/BEGIN-PROCEDURE LOGGING=C,PARAMETERS=YES(PROCEDURE-PARAMETERS=( -

/&SM2OUT=SM2.CHANGE,&SM2R1OUT=SM2R1.OUT,&SM2UTASK=SM2.SAM.TASK, -

/&SM2R1OTASK=SM2R1.OUT.TASK),ESCAPE-CHARACTER=C'&')

/MODIFY-TERMINAL-OPTIONS OVERFLOW-CONTROL=NO-CONTROL /ASSIGN-SYSDTA TO-FILE=*SYSCMD

/DELETE-FILE FILE-NAME=&SM2R1OUT /SET-JOB-STEP

/REMARK ==========================================================

/REMARK *** LOAD SM2R1 AND ANALYZE SM2 FILE***

/REMARK ==========================================================

/START-SM2R1 MONITOR-FILE-NAME=&SM2OUT,LIST-FILE-NAME=&SM2R1OUT

PRINT-CONFIGURATION

SET-TITLE TEXT='*** STANDARD-STATISTIKEN ***'

PRINT-REPORTS REPORT-LIST=(*STD,*FILE)

PRINT-DISK-STATISTICS

PRINT-QUEUE-TRANSITION END

/REMARK ==========================================================

/REMARK *** PRINT SM2R1 OUTPUT FILE***

/REMARK ==========================================================

/PRINT-DOCUMENT FROM-FILE=&SM2R1OUT,DELETE-AFTER-PRINT=*YES,DOCUMENT- -

/FORMAT=*TEXT(LINE-SPACING=*BY-EBCDIC-CONTROL)

/REMARK ==========================================================

/REMARK ***ANALYZE TASK***

/REMARK ==========================================================

/DELETE-FILE FILE-NAME=&SM2R1OTASK /SET-JOB-STEP

/REMARK ==========================================================

/REMARK	***	LOAD SM2R1 AND ANALYZE SM2 FILE	***
/REMARK	***	(TASK RECORDS)	***

/REMARK ==========================================================

/START-SM2R1 MONITOR-FILE-NAME=&SM2UTASK,LIST-FILE-NAME=&SM2R1OTASK SET-TITLE TEXT='*** TASKSTATISTIK ***'

PRINT-TASK-STATISTICS INFORMATION=*HIGH END

U3585-J-Z125-8-76 359