Siemens U3585-J-Z125-8-76 1, SM2 monitoring system Attributes of the user-specific SM2 output file

SM2 operation			Activating user task monitoring
	Attributes of the user-specific SM2 output file
	Operand for file	FILE =*STD	FILE =*BY-LINK-NAME
	creation
	Definition of file
	attributes	Predefined	Optional
	File name	$userid.SM2.
		TASKSTATISTIK.nnnn1)	filename
	Block length	BUFFER-LENGTH =	BUFFER-LENGTH =
		*STD(SIZE=16)	*STD(SIZE=number) 3)
	Storage space	SPACE = *RELATIVE	SPACE = *RELATIVE
	allocation	(PRIMARY-ALLOCATION=48,	(PRIMARY-ALLOCATION=number1,
		SECONDARY-ALLOCATION=48)	SECONDARY-ALLOCATION=
			number2) 2),3)
	Access method	SAM	No selection option,
			SAM format is mandatory.
	Open mode	EXTEND	No selection option, the existing file is
			always extended
	Format of the data	BLOCK-CONTROL-INFO	BLOCK-CONTROL-INFO =
	blocks	is defined by the corresponding	*PAMKEY/ *WITHIN-DATA-BLOCK/
		(class 2) system parameter	*NO 4)

1)nnnn = TSN of the task to be monitored

2)PRIMARY-ALLOCATION and SECONDARY-ALLOCATION each 48 unless defined otherwise by the user.

3)In the case of an SM2 output file assigned using link names, the BUFFER-LENGTH and SPACE

4)attributes are taken from the standard file, unless specified otherwise by the user.

4)The BLOCK-CONTROL-INFO=*NO operand is treated like BLOCK-CONTROL-INFO= *WITHIN-DATA-BLOCK, because only SAM format is permitted for the file.

Notes

To generate module-related program counter and SVC statistics, the load information (the load address and length) of each module is required for each module which has been linked into the monitored program or is to be loaded by the monitored program. When the program or measurement is terminated by means of the /STOP-TASK- MEASUREMENT command, SM2 determines this module information and writes it to the SM2 output file.

U3585-J-Z125-8-76 193