Siemens SM2 monitoring system manual Tsn, Userid, Job-Name, Typ, Serv-Rate, Cpu-Time, PAG Read

PERIODIC TASK report	SM2 reports
Monitoring information
TSN	TSN of the task

Depending on whether the output value USER-ID or JOB-NAME was selected in the SELECT-PERIODIC-TASK-PARAMETER statement, the second column contains either

USERID	User ID of the task
	or
JOB-NAME	Job name of the task
TYP	Current task type at the end of the monitoring cycle
SERV-RATE	Elapsed service units of the task per second
CPU-TIME	Task’s percentage of the (TU+TPR+SIH+IDLE) time (without the
	share of the hypervisor under VM)
IO(/S)	Number of I/Os for the task per second
UPG	Mean UPG of the task
PAG READ	Number of page reads per second for the task

Notes

–Physical writing of pages to the paging disk is assigned to the system task with the TSN "PGE" for the purposes of consumption statistics.

–The monitored data on CPU utilization is based on native CPU time (see “CPU time and CPU service units on SR2000” on page 446 of the glossary).

284 U3585-J-Z125-8-76