Siemens SM2 monitoring system, U3585-J-Z125-8-76 1 60 , Typical SM2 run SM2 operation Typical SM2 run

60 U3585-J-Z125-8-76
Typical SM2 run SM2 operation
Typical SM2 run
SM2 monitoring task set up internally
(in first SM2 call during system run)
/START-SM2
CALL-ADMINISTRATION-PART
//MODIFY-MEASUREMENT-PERIODS
OFFLINE-PERIOD=<cycle>
//OPEN-LOG-FILE FILE=<filename>
//START-MEASUREMENT-PROGRAM
TYPE=<monitoring-program>
//CALL-EVALUATION-PART
REPORT <reportname>
START
END
/STOP-SUBSYSTEM
SUBSYSTEM-NAME=SM2
Start SM2
Terminate SM2-ONLINE
Terminate monitored-data acquisition,
implicitly close SM2 output file,
and unload SM2
During the monitoring cycle, data is
collected and formatted.
On completion of the monitoring cycle, data is
written to the central buffer and the SM2 file.
Start output of
online reports
Analyze SM2 output file
after SM2 run
Analyze SM2 output file
during SM2 run
Select online reports
Set monitoring cycle
Open SM2 output file
SM2 output file
Switch to analysis subinterval
Switch to administration facility
Start monitoring programs