Siemens U3585-J-Z125-8-76 1, SM2 monitoring system manual Mscf report

SM2 reports	MSCF report
# SERVER TASKS
ORIGINAL	Number of server tasks originally requested
ACTUAL	Number of current server tasks
OCCUPIED	Number of current server tasks which could cause a bottleneck

These values merely indicate the status at the end of the monitoring cycle and do not represent the mean value over the entire monitoring cycle.

TASK LIMITS
MAXIMUM	Maximum number of server tasks
FLOW SET	Limit value for the number of occupied server tasks as of which the
	FLOW state is set
FLOW RESET	Limit value for the number of occupied server tasks as of which the
	FLOW state is reset

The MSCF subsystem sets its own FLOW or NO FLOW state, depending on the number of occupied server tasks. If the FLOW state is set, the maximum number of server tasks can be exceeded.

For further information on server tasks and their limit values, see the “HIPLEX MSCF” manual [4].

U3585-J-Z125-8-76 267