Siemens U3585-J-Z125-8-76 1, SM2 monitoring system manual Start-Isam-Statistics, Monitor Isam pools

Statements for nonprivileged users START-ISAM-STATISTICS

START-ISAM-STATISTICS

Monitor ISAM pools

Function

This statement is used to select one or more ISAM pools whose monitored data is to be output in the next monitoring cycle.

The user may include ISAM pools in the monitoring process only if the SM2 primary admin- istrator has authorized the monitoring of ISAM pools. If this is the case, the entry ISAM appears in the USER MEASUREMENTS ALLOWED line of the SM2 MEASUREMENT STATUS screen.

If ISAM pool monitoring has been permitted, each user can activate or deactivate global ISAM pools and all task-specific and user-specific ISAM pools which have been or will be set up under his/her user ID.

SM2 supports the simultaneous monitoring of as many as 16 ISAM pools for all nonprivi- leged users.

Only the input of the last START-ISAM-STATISTIC statement applies here. If you wish to monitor several ISAM pools, these must be specified in a START-ISAM-STATISTIC statement.

Format

Operation	Operands
START-ISAM-STATISTICS							
			POOL-NAME=poolname1				
							
			 *HOST-SYSTEM 				
							
							
			[,SCOPE= *TASK(TSN=tsn) ] 				
	POOL = 					)[,*POOL()]...)	
	(*POOL(		 *USER
							
			 *HOME-PVS				
							
			[,CAT-ID=	]			
			 catid				
							
							

U3585-J-Z125-8-76 185