Siemens SM2 monitoring system manual Set/Modify-Cosmos-Parameter, Set-Servicetime-Parameter

Changes made since the last version Preface

–SET/MODIFY-COSMOS-PARAMETER

The new MEASUREMENT-TIME operand can be used to specify the duration of the monitoring process.

In the TSN operand, up to 16 TSNs can be specified.

In the TSN, USER-ID, JOB-NAME and CATEGORY operands, the last character may be an asterisk (*).

–SET-SERVICETIME-PARAMETER

The DEVICES operand has been extended to accept 256 device names.

–SET-TASK-PARAMETER

The DEVICES operand has been extended to accept 64 device names.

–SHOW-ACTIVE/DEFINED-PARAMETER

The TYPE operand has been extended to include the new monitoring programs BCAM-CONNECTION and DISK-FILE.

–START/STOP/CHANGE-MEASUREMENT-PROGRAM

The TYPE operand has been extended to include the new monitoring programs BCAM-CONNECTION, DISK-FILE and HSMS.

●New, enhanced and obsolete user statements

–The SELECT-SYMMETRIX-CONTROLLER user statement (select the SYMMETRIX controller for the SYMMETRIX-DEVICE report) has been included in the manual for the first time.

–The REPORT user statement has been extended to include the values BCAM, DISK_FILE (DFILE) and SYMMETRIX (SYM).

–The CHANNEL user statement is now obsolete, since the CHANNEL report can now output follow-up screens.

●SM2 program interface

In the SM2GDAT macro, the variable ’unsigned long buffer_flags’ is now incompatible. The BCAM-CONNCETION, CHANNEL-IO, DISK-FILE and HSMS data buffers are now available.

●

●

●

Changes to the SM2 output file

In SM2 output files with freely selectable file characteristics, the block length must be 16.

Dynamic IO reconfiguration

SM2 recognizes a dynamic IO reconfiguration and, if necessary, automatically changes the number of objects being monitored. This is described in a new section in chapter 2.

The constraints on SR2000 have been incorporated. For further information, please refer to section 5.8 of the manual "OSD-SVP V2.0 User Interfaces on Systems with RISC Architecture" [20].

6 U3585-J-Z125-8-76