Siemens U3585-J-Z125-8-76 1, SM2 monitoring system manual Reason, Create, Term, Modul, Code

SM2 information screens			STATUS TABLE
REASON		Reason for the trace entry. In many cases (with TYPE=S-ER) this is
		the name of the system function which reported an error.
CREATE:		Creation of task
TERM:		Termination of task
Subsystem-STA:		Start of subsystem use
Subsystem-STO:		End of subsystem use
Subsystem-NLD:		Subsystem not loaded
TYPE
I-ER:	Internal error		(internal error during execution of SM2)
S-ER:	System error		(error calling a BS2000 system function)
TASK:	Task event		(start/end/crash of an SM2 task)
SS:	Subsystem event		(start/end of subsystem use by SM2)
MODUL		Abbreviated name of the SM2 module writing the trace entry
		(without "NPS", "NPFS")
ID		Identifies the location at which the error occurred. In many cases
		this is the offset within the module. If the error is unique within the
		module, this field contains no entry.
CODE		Return code of the system function called (for TYPE=S-ER) or
		additional information (for TYPE=I-ER) or zero

Note

The trace entries (particularly those with TYPE=I-ER,S-ER) are only relevant for SM2.

U3585-J-Z125-8-76 335