Siemens U3585-J-Z125-8-76 1, SM2 monitoring system manual File reports, Wait, Check

SM2 reports FILE reports

	D016ZE04	SM2 PRIVILEGED FILE CYCLE: 120 S				99-03-24 14:30:00
-----+-----	+	-----+	-----+	-----+-------------------------------------------------
	WAIT CHECKREAD WRITETIME FILENAME
	-----+-----	+	-----+	-----+	-----+-------------------------------------------------
0.0		0.0	0.0	0.0	*:2OSX:$TSOS.TSOSCAT
0.0		0.0	0.0	0.0	*:2OSW:$TSOS.TSOSCAT
0.0		0.0	0.0	0.0	*:2OS2:$TSOS.TSOSCAT
0.0		0.0	0.0	0.0	*:2SO6:$TSOS.TSOSCAT
0.0		0.0	0.0	0.0	*:2OS7:$TSOS.TSOSCAT
0.0		0.0	0.0	0.0	16.3:2ORZ:$TSOS.TSOSCAT
0.5		0.0	0.5	0.0	2.4:2OSQ:$TSOS.TSOSCAT
0.0		0.0	0.0	0.0	21.2:2OSL:$TSOS.EQUISAMQ
0.0		0.0	0.0	0.0	*:2OS6:$TSOS.SYSEAM
0.0		0.0	0.0	0.0	*:2OSX:$TSOS.SYSEAM
0.0		0.0	0.0	0.0	*:2OS2:$TSOS.SYSEAM
0.0		0.0	0.0	0.0	*:2OS7:$TSOS.SYSEAM
0.0		0.0	0.0	0.0	13.6:2OS6:$NEI.SM2.SAM.MANUAL.V13.0
-----+-----		+	-----+	-----+	-----+-------------------------------------------------

Monitoring information

WAIT	The number of WAIT operations per second is incremented if:
	– reading from the file to main memory was initiated and the task
	is waiting for the end of the read operation, or
	– writing from main memory to the file was initiated and the task
	is waiting for the end of the write operation.
	WAIT operations not combined with read or write operations are
	ignored.
CHECK	The number of CHECK operations per second is incremented
	whenever a check is made to see whether the preceding write
	operation was performed properly (read-after-write check). Only
	those read-after-write checks are counted which were initiated
	together with a write operation.
READ	Number of READ operations per second
WRITE	Number of WRITE operations per second

U3585-J-Z125-8-76 253