Siemens SM2 monitoring system, U3585-J-Z125-8-76 1 manual Devices = *NONE, Devices = *ALL

SET-TASK-PARAMETER Statements for SM2 administrators

TYPE =

The tasks to be monitored are selected via their task attribute. All tasks with the attributes specified at selection time using the START-MEASUREMENT-PROGRAM or LOGON command are monitored. If the task attribute of a task is changed in the course of the monitoring program session, this will not influence the measurement itself, i.e. the task is neither excluded from nor included in monitoring as a result.

TYPE = *NOT-SPECIFIED

No tasks are selected via the task attribute.

TYPE = list-poss(4): *SYSTEM / *BATCH / *DIALOG / *TP

*SYSTEM:	All system tasks are to be monitored.
*BATCH:	All batch tasks are to be monitored.
*DIALOG:	All interactive tasks are to be monitored.
*TP:	All TP tasks are to be monitored.

DEVICES =

Specifies the devices to be monitored by the task monitoring program for each task. A check is carried out to establish whether these devices are defined in the configuration. It is possible to monitor up to 64 devices. If more than 64 devices are defined by means of partial qualification or *DISK, these are selected in the following order of priority:

–devices whose mnemonic device names have been specified in their entirety

–devices whose mnemonic device names have been specified in partially qualified form

–*DISK

With *DISK and *ALL, up to 64 mnemonic names are selected in the order given in the PDT (Physical Device Table).

DEVICES = *NONE

No devices are to be monitored.

DEVICES = *ALL

All devices are to be monitored, with the exception of communication controllers (CTCCs, TRANSDATA 960s, 8170 Cluster Controllers, LAN adapters and HNCs).

DEVICES = list-poss(64): *DISK

All disk devices are to be monitored.

DEVICES = list-poss(32): <alphanum-name 2..4 with-wild>

The specified devices are to be monitored. An asterisk (*) is also permitted as the last character in a wildcard specification.

134 U3585-J-Z125-8-76