Formats, Tsn = *Own | Siemens SM2 monitoring system manual

Activating user task monitoring

SM2 operation

Formats

START-TASK-MEASUREMENT

TSN = *OWN / <alphanum-name 1..4> ,FILE = *STD / *BY-LINK-NAME

,PCOUNTER-INTERVAL = *NONE / <integer 1..10000> ,SVC-STATISTICS = *OFF / *ON

,LOAD-INFO = STD / DETAILED

STOP-TASK-MEASUREMENT

TSN = *OWN / <alphanum-name 1..4>

Operands

TSN =

Speciﬁes the task to be monitored or for which monitoring is to be terminated.

TSN = *OWN

The task invoking the command will be monitored or monitoring of that task will be termi- nated.

TSN = <alphanum-name 1..4>

The task with the TSN speciﬁed is monitored or monitoring of that task is terminated. Only users who have been assigned the system privilege SW-MONITOR-ADMINISTRATION can start or terminate monitoring of any tasks. All other users can only monitor their own tasks.

Restriction: The task SM2U, which processes the user-speciﬁc SM2 output ﬁles, cannot be monitored.

FILE =

Speciﬁes the user-speciﬁc SM2 output ﬁle.

FILE = *STD

The user-speciﬁc SM2 output ﬁle contains the ﬁle attributes which are deﬁned in the following table.

FILE = *BY-LINK-NAME

The user deﬁnes the ﬁle name and further ﬁle attributes using the corresponding BS2000 commands. The ﬁle is assigned via the link name. The link name for the user-speciﬁc SM2 output ﬁle is PALINK.

190	U3585-J-Z125-8-76

Image 190

Siemens SM2 monitoring system Formats, Activating user task monitoring SM2 operation, Tsn = *Own, Start-Task-Measurement

Contents

Preface Brief description of the SM2 monitoring system Summary of contents Target group Summary of contents Volume 2 Analysis and Display of SM2 Monitored Data Changes made since the last version Preface Changes made since the last version of the manualSM2 Changes made since the last version SET-TASK-PARAMETER SET-SERVICETIME-PARAMETERSET/MODIFY-COSMOS-PARAMETER SHOW-ACTIVE/DEFINED-PARAMETER SM2U1 Notational conventionsNotational conventions SM2R1 Readme ﬁle Readme ﬁle Preface SM2 monitoring program Overview Overview SM2 monitoring program SM2 SM2 operating modes Operating modes/users Privileged users UsersOperating modes/users SM2 monitoring program Nonprivileged users Table of authorizations Authorization table Activating the monitoring task Activating a monitoring taskUSER-ADMISSION Acquisition of monitored data Acquisition of monitored data BS2000 Acquisition of monitored data SM2 monitoring program Online monitoring cycle Monitoring cycleMonitoring cycle SM2 Measurement Status Outputting and saving monitored data Outputting and saving monitored data SM2 monitoring program Outputting and saving monitored data Uninterruptible clock resettingMethods used for compressed output of monitored data SM2 monitored variables SM2 monitoring program SM2 monitored variablesMonitored variable Description SM2 monitored variables IOs Memory VM2000 Analyzing monitored data Analyzing monitored data SM2 monitoring program Performance expectations of the user Interactive mode criteriaPerformance expectations of the user Performance expectations of the user SM2 monitoring program Batch processing criteria System monitoring Using SM2 for system monitoringTrend monitoring System monitoring SM2 monitoring program Bottleneck analysis Basic procedure for ensuring efﬁcient DP system usage Efficient DP system usage SM2 in computer networks SM2 monitoring program Prerequisites for using SM2 in computer networks14 SM2 in computer networks Selecting hosts with SM2 Screen output SM2 in computer networksUsers in a computer network Standard SM2 output ﬁle Dynamic IO reconﬁguration SM2 monitoring programs Overview SM2 monitoring programs Monitored data on connection sets Privileged SM2 monitoring programsBCAM-CONNECTION Remote LocalBoth Examples of monitoring program deﬁnitions Monitored data on the catalog management system Monitored data on the channel loadCHANNEL-IO Monitored data on DAB activities Monitored data on disk accessMonitored data on the system for bottleneck analysis Cosmos Monitored data on lock requests Monitored data on ﬁle access for selected disksDISK-FILE Monitored data on volumes in global storage Monitored data on ﬁle access for selected ﬁlesMonitored data on access to global storage Monitored data on ﬁle migration Monitored data on network devices Monitored data on Isam poolsMonitored data on communication between hosts Monitored data on Hiplex Mscf Monitored data on tasks Monitored data on 3419/21 disk controllers under PCAPCA Monitored data on Posix Monitored data on caches under User PFAPFA Monitored data on the Bcam pool Responsetime Example Calculating the time values Example Responses to a /SHOW-FILE-ATTRIBUTES command Connection-speciﬁc parameters Examples of the Responsetime monitoring program Monitored data on the service time Servicetime Global system and category-speciﬁc monitored data Monitored data on SVC callsSVC Monitored data on TCP/IP connections Task-speciﬁc monitored dataTask Monitored data on UTM applications Monitored data on locksTLM CPU shares of virtual machines MODIFY-ACCOUNTING-PARAMETERS SET-RECORD-TYPE=UTMA Monitored data on ﬁle access Nonprivileged SM2 monitoring programs Task Format Starting and terminating SM2Starting the program Operands Monjv = *NONE Terminating the programMonjv = CPU-LIMIT = Overview of SM2 operation START-SM2 CALL-ADMINISTRATION-PART Typical SM2 run SM2 operation Statements for SM2 adminstrators Statements for SM2 administratorsStatements for deﬁning monitoring programs ADD-BCAM-CONNECTION-SET INITIATE-COSMOS Statements for outputting information Statement for terminating the SM2 program Add connection set for BCAM-CONNECTION monitoring Statements for SM2 administratorsADD-BCAM-CONNECTION-SET Function CONNECTION-SELECTION = *BY-PORT-NUMBER CONNECTION-SELECTION =CONNECTION-SELECTION = *BY-NEA-NAME CONNECTION-TYPE = HOST-SELECTION = *ANY HOST-SELECTION =HOST-SELECTION = *SPECIFIED Add connection set for Responsetime monitoring ADD-CONNECTION-SETADD-CONNECTION-SET SET-DEFINITION = *EXCEPT-CONNECTION SET-DEFINITION =SET-DEFINITION = *BY-CONNECTION CONNECTION-SET = list-poss5 *CONNECTION CONNECTION-TYPE = ADD-COSMOS-EVENT ADD-COSMOS-EVENTDeﬁne events for monitored-data acquisition EVENT-NAME = ADD-FILE ADD-FILEDeﬁne ﬁle to be monitored FILE-NAME = ﬁlename ADD-ISAM-POOL ADD-ISAM-POOLDeﬁne Isam pool to be monitored Scope = CAT-ID = Scope = *USERUSER-ID = alphanum-name CAT-ID = *HOME-PVS CALL-ADMINISTRATION-PART CALL-ADMINISTRATION-PARTSwitch from evaluation part to administration facility CALL-ADMINISTRATION-PART CALL-EVALUATION-PART Switch from administration facility to evaluation partCALL-EVALUATION-PART CALL-EVALUATION-PART CHANGE-MEASUREMENT-PROGRAM Type = *PERIODIC-TASK Type = *SERVICETIMEType = *ISAM Type = *RESPONSETIME CLOSE-LOG-FILE CLOSE-LOG-FILEClose SM2 output ﬁle CLOSE-LOG-FILE END ENDTerminate SM2 run END INITIATE-COSMOS INITIATE-COSMOSPrepare Cosmos monitoring program INITIATE-COSMOS MODIFY-ADMINISTRATOR-ADMISSION Admit additional SM2 administrators MODIFY-COSMOS-PARAMETER MODIFY-COSMOS-PARAMETERModify parameters for Cosmos monitoring MODIFY-COSMOS-PARAMETER Title = c-string Title =Title = *UNCHANGED BUFFER-SIZE = NUMBER-OF-BUFFERS = ADDITIONAL-INFO = *CONFIGURATIONBUFFER-SIZE = *UNCHANGED NUMBER-OF-BUFFERS = *UNCHANGED Output = *STREAM-TAPE Output = *WRAP-AROUNDOutput = *TAPE TASK-SELECTION = USER-ID = Category =Category = *NOT-SPECIFIED USER-ID = *NOT-SPECIFIED EVENT-SELECTION = *ALL-BY-ADD-COSMOS-EVENT EVENT-SELECTION =EVENT-SELECTION = *UNCHANGED EVENT-SELECTION = *SPECIFIED DAB-CACHE-ID = *ANY DAB-CACHE-ID =DAB-CACHE-ID = *UNCHANGED MEMORY-CLASS = TSKI-SWITCH = *ANY TSKI-SWITCH =TSKI-SWITCH = *UNCHANGED TSKI-SWITCH = *TASK MEASUREMENT-TIME = Unload = *AT-MEASUREMENT-PROGRAM-STOPUnload = *AT-SM2-STOP MEASUREMENT-TIME = *UNCHANGED MODIFY-MEASUREMENT-PERIODS Modify SM2 monitoring cycle SAMPLING-PERIOD = ONLINE-PERIOD = *SAME-AS-OFFLINEONLINE-PERIOD = integer SAMPLING-PERIOD = *UNCHANGED MODIFY-RESPONSETIME-PARAMETER Modify parameters for Responsetime monitoring Definition = *1 Definition =Definition = *UNCHANGED Definition = *2 TRANSACTTIME-BUCKETS = *STD-LIMITS TRANSACTTIME-BUCKETS =TRANSACTTIME-BUCKETS = *UNCHANGED WAITTIME-BUCKETS = MODIFY-USER-ADMISSION Deﬁne authorizations for nonprivileged usersMODIFY-USER-ADMISSION Task = File = USER-ID = *ALLTask = *INHIBIT File = *UNCHANGED Isam = *ALLOW Isam = *INHIBIT OPEN-LOG-FILE OPEN-LOG-FILEOpen SM2 output ﬁle File = *STD BUFFER-OUTPUT = *NORMAL BUFFER-OUTPUT =BUFFER-OUTPUT = *IMMEDIATE REMOVE-BCAM-CONNECTION-SET REMOVE-BCAM-CONNECTION-SETExclude connection sets from BCAM-CONNECTION monitoring SET-NAME = SET-NAME = SET-NAME = *ALL REMOVE-CONNECTION-SETREMOVE-CONNECTION-SET REMOVE-CONNECTION-SET REMOVE-COSMOS-EVENT REMOVE-COSMOS-EVENTRemove events from Cosmos monitoring parameters EVENT-NAME = *ALL REMOVE-COSMOS-EVENT REMOVE-FILE REMOVE-FILERemove ﬁles from File monitoring parameters FILE-NAME = FILE-NAME = *ALL REMOVE-ISAM-POOL REMOVE-ISAM-POOLRemove Isam pools from Isam monitoring parameters POOL-NAME = POOL-NAME = *ALL CAT-ID = *ANY SELECT-HOSTS Deﬁne hosts for SM2 statements and screen output 111 SET-BCAM-CONNECTION-PARAMETER Deﬁne BCAM-CONNECTION monitoring parameters INPROC-BUCKETS = *UNCHANGED INPROC-BUCKETS =INPROC-BUCKETS = *STD-LIMITS OUTPROC-BUCKETS = SET-CHANNEL-IO-PARAMETER SET-CHANNEL-IO-PARAMETERDeﬁne CHANNEL-IO monitoring parameters Channels = Channels = *ALL SET-COSMOS-PARAMETER SET-COSMOS-PARAMETERDeﬁne Cosmos monitoring parameters SET-COSMOS-PARAMETER 116 Title = C’COSMOS’ Tasks are selected by means of their job name Tasks are selected by means of their category EVENT-SELECTION = *ALL-BY-ADD-COSMOS-EVENT 121 Unload = SET-DISK-PARAMETER SET-DISK-PARAMETERDeﬁne Disk monitoring parameters Devices = list-poss256 alphanum-name 2..4 with-wild SET-DISK-FILE-PARAMETER SET-DISK-FILE-PARAMETERDeﬁne DISK-FILE monitoring parameters Devices = list-poss8 alphanum-name SET-PERIODIC-TASK-PARAMETER Deﬁne PERIODIC-TASK monitoring parameters JOB-NAME = list-poss64 alphanum-name SET-RESPONSETIME-PARAMETER SET-RESPONSETIME-PARAMETERDeﬁne Responsetime monitoring parameters SET-RESPONSETIME-PARAMETER RESPONSETIME-BUCKETS = *STD-LIMITS CONNECTION-NUMBER = *1024RESPONSETIME-BUCKETS = list-poss5 integer WAITTIME-BUCKETS = *STD-LIMITS SET-SERVICETIME-PARAMETER SET-SERVICETIME-PARAMETERDeﬁne Servicetime monitoring parameters SET-SERVICETIME-PARAMETER SET-SYSSTAT-PARAMETER SET-SYSSTAT-PARAMETERDeﬁne Sysstat monitoring parameters USED-DEVICES = USED-DEVICES = *NONE SET-TASK-PARAMETER SET-TASK-PARAMETERDeﬁne Task monitoring parameters SET-TASK-PARAMETER JOB-NAME = JOB-NAME = *NOT-SPECIFIED TSN = TSN = *NOT-SPECIFIEDUSER-ID = USER-ID = *NOT-SPECIFIED JOB-CLASS = JOB-CLASS = *NOT-SPECIFIED Devices = *NONE Devices =Devices = *ALL SHOW-ACTIVE-PARAMETER SHOW-ACTIVE-PARAMETEROutput active monitoring parameters Type = *ALL Type = *ISAM SHOW-DEFINED-PARAMETER SHOW-DEFINED-PARAMETEROutput deﬁned monitoring parameters SHOW-DEFINED-PARAMETER Type = *DISK-FILE SHOW-MEASUREMENT-STATUS SHOW-MEASUREMENT-STATUSOutput monitoring status SHOW-MEASUREMENT-STATUS SHOW-SELECTED-HOSTS SHOW-SELECTED-HOSTSOutput selected hosts SHOW-SELECTED-HOSTS SHOW-SM2-STATUS Output status of SM2 system tasks From = *ACTUAL From =From = integer SHOW-USER-MEASURED-OBJECTS SHOW-USER-MEASURED-OBJECTSOutput monitored objects and associated users SHOW-USER-MEASURED-OBJECTS START-MEASUREMENT-PROGRAM Start monitoring program run Type = *GSVOL Type = *DLMType = *GS Type = *HSMS Type = *UTM Type = *TCP-IPType = *TLM Type = *VM STOP-MEASUREMENT-PROGRAM STOP-MEASUREMENT-PROGRAMTerminate monitoring program run STOP-MEASUREMENT-PROGRAM Terminates the DISK-FILE monitoring program Terminates the Sysstat monitoring program Statements for nonprivileged users SM2 operation Default values for statementsStatements for nonprivileged users Statements for selecting monitored data for screen output Statements for nonprivileged users Statements for controlling reports Statements for nonprivileged users SM2 operation Starting report output Input during monitoring 154 155 General statements Break Switch to system modeBreak CHANGE-ISAM-STATISTICS CHANGE-ISAM-STATISTICSInclude and exclude Isam pools ADD-POOL = *HOST-SYSTEM =*NONEScope =*USER Select devices with monitored data DeviceDevice Disk ALL Monitoring cycle Terminate monitoring Name FileMonitor ﬁles Stats Request user help information HelpHelp Output Deﬁne output modeOutput Interval =CONTROLLED Insert remarks RemarkRemark Report ReportSelect reports STD 170 With SR2000, the GS and Gsvol reports are not available Start output of selected reports RestartRestart SELECT-DAB-CACHE SELECT-DAB-CACHESelect DAB cache ADD-CACHE-ID SELECT-PCA-CACHE SELECT-PCA-CACHESelect cache for PCA Device report Cache CACHE-ID=*ALL SELECT-PCA-CONTROLLER SELECT-PCA-CONTROLLERSelect controllers for PCA Cache report Controller SELECT-PERIODIC-TASK-PARAMETER SELECT-PERIODIC-TASK-PARAMETEROUTPUT-INFORMATION =SERVICE-UNITS, CPU, IO, UPG, PAGING-READ Sort Select PFA cache SELECT-PFA-CACHESELECT-PFA-CACHE SELECT-SYMMETRIX-CONTROLLER SELECT-SYMMETRIX-CONTROLLERSelect Symmetrix controllers ADD-CONTROLLER-MN REMOVE-CONTROLLER-MN SELECT-UTM-APPLICATION SELECT-UTM-APPLICATIONSelect UTM applications ADD-APPLICATION Output monitored objects Type =TASK Start report output StartStart Monitor Isam pools START-ISAM-STATISTICSSTART-ISAM-STATISTICS POOL-NAME PoolTSN= Status Status Terminate monitoring of Isam pools STOP-ISAM-STATISTICSSTOP-ISAM-STATISTICS BS2000 commands for activating user task monitoring Activating user task monitoring TSN = *OWN FormatsActivating user task monitoring SM2 operation START-TASK-MEASUREMENT SVC-STATISTICS = PCOUNTER-INTERVAL =PCOUNTER-INTERVAL = *NONE SVC-STATISTICS = *OFF Command return codes SC2 SC1 Maincode Meaning/guaranteed messages Attributes of the user-speciﬁc SM2 output ﬁle File =*STD File =*BY-LINK-NAME Activating user task monitoring SM2 operation Introduction Writing to the SM2 output ﬁleSM2 output file Attributes of the SM2 output ﬁle SM2 output ﬁle SM2 operation BLOCK-CONTROL-INFO= *WITHIN-DATA-BLOCK Managing the SM2 output ﬁle PAM output ﬁle SM2 output ﬁle SM2 operation SAM output ﬁle Opening and closing the SM2 output ﬁle SM2 monitoring program examples Examples Examples SM2 operation SM2 screen output SM2 reports SM2 screen output SM2 reports Overview of the utilization of Symmetrix controllers for Measurement Status SM2 information screensDisplaying follow-up screens to information screens Samples SM2 information screens SM2 screen outputCycle Representation of values in SM2 output screens Output sequence Report name Identiﬁers Output sequence Report output SM2 reports ACF reportACF report Monitoring information Resource Utilization in Last Interval Activity report Activity report SIH CPU UtilizationTPR Idle Rdact PCS DataSract IO’S PER SEC SYS Activity report SM2 reportsTasks Current Task Type #-TASKS CPU-Q Tasks in Scheduler Queues#-ACT IO-Q WS-ACT MemoryNPP WS-WACT Posix Data Response Statistics Bcam Connection report Bcam Connection report SM2 reports Bcam Connection report Category report Category report SM2 reports CPU-TIME % Category reportCategory Name PAGING-IO 1/S Category Queue report SM2 reports MIN MPL MAX MPL WeightCategory Queue report Task category Category Queue report Wact Task in Scheduler QueuesACT Nadm WS-ALL PPC Category WSET-ReportCategory Wset report UPG WS-ACT PPC WS-WACT PPC Channel report Channel reportProgram TYPE=*CHANNEL Channel report SM2 reports Monitoring information CMS report CMS reportMultiprocessor systems CMS report SM2 reports Pageable #-BMTResident Block QU REQ. QUSER. QU Userid QU READ-LBN ItemsRead Scan REMOTE-FILE /S Responsetime MSLOCAL-FILE /S SHARED-FILE /S CPU report CPU reportStop % Normed Measured DAB reports DAB reports CACHE-ID DAB reportDAB report SM2 reports Size DAB report Write 1/S DAB Cache report DAB Cache report SM2 reports MED DAB Cache reportMOD Sizefix VSN / File FIRST-HP,LAST-HP 243 Device report Device report SM2 reports Print Device reportTape Other Type VolumeDevice Activity Utilization Active Disk File report SM2 reports Disk File reportProgram TYPE=*DISK-FILE Filename Disk File reportWrite VSN Number Enqueue 1/S DLM reportDLM report SM2 reports Number Convert 1/S Number Grant Events 1/S DLM reportNumber Information 1/S Number Release Events 1/S Outputting monitored data in the File reports File reportsFile reports SM2 reports Privileged File Report Wait File reportsCheck Time Global report Global report Partition GS reportGS report SM2 reports Unit Gsvol report Gsvol reportDEVICE-MN Isam reports SM2 reports Isam reportsOutputting monitored data in the Isam reports Isam reports FXD PGS SM2 Memory Report SYS Memory reportMemory report SM2 Memory Report SEL WR-Q Main Memory FramesONLY-Q SYS-GLOB # Pages in Virtual Memory CL1 Paging Area Frames TotalUsed CL2 1ST-READ Faults TotalMemory report SM2 reports Reclaims Transfers Read Transfers GS Read Calls Mscf reportMscf report SM2 reports Shortages Mscf report # Requests Request with Reply AVG TimeAVG Wait Flow State AVG Time Device Type NET Device reportNET Device report #BYTES 1/IO NSM report NSM report SM2 reports NSM report PCA reports PCA reports SM2 reports PCA reports PCA Cache report PCA Cache report SM2 reports PCA Cache report CTL DEV PCA Controller reportPCA Controller report SM2 reports #CACH PCA Controller report Device MN PCA Device reportPCA Device report SM2 reports Device VSN PCA Device report Read H-RATE % Sract 1/SEC PCS reportPCS report SM2 reports CPU SQACT% PCS reportSqpln % DUR-RO 1/SEC Periodic Task report SM2 reports Program TYPE=*PERIODIC-TASK Periodic Task report TU+TPR JOB-NAME TSNUserid TYP PFA reports PFA reports Cache ID PFA Cache reportPFA Cache report SM2 reports Cache MED RD HIT PFA Cache reportBLK Size WR HIT PFA Controller report SM2 reports PFA Controller reportController Type 3419 3421 3860 Symmetrix #DEV PFA Controller reportCTL MN SEC NR Posix report Posix report SM2 reports Wcache Posix reportRcache SREAD/S, SWRITE/S, FORK/S, EXEC/S Responsetime report SM2 reports Responsetime reportProgram TYPE=*RESPONSETIME Responsetime report D016ZE04 SM2 Responsetime Category Cycle Think Time CONN-TYPERESP. Time TRANS. Time INPUT-LEN NR. InterRate 1/SEC OUTPUT-LEN Responsetime Catgory NameAVG #INT Rate Shared PVS report Shared PVS report Shared PVS report SM2 reports Monitoring information SVC SVC reportSVC report SUM Symmetrix reports Symmetrix reports SM2 reports Symmetrix Controller report Symmetrix Controller reportController MN TOT HIT Symmetrix Device report Symmetrix Device report Mnemonic name of the device TCP/IP report TCP/IP report TCP/IP report SM2 reports Monitoring information Waiting Task TLM reportTLM report Occupations UTM reports UTM reports SM2 reports UTM report UTM ReportAPPLI-NAME UTM report SM2 reports TAC-CL DDP # DS #DB-CALL # TSK # User UTM Application report UTM Application report Steps with DB Total TimeTOT Time with DB Time in DB Asyn TA’S # Dial Steps# Dial TA’S Asyn Conv VM2000 report VM2000 report SM2 reports VM2000 report CPU Meas Number of CPU’S Active Parameter SM2 information screensActive Parameter Connection BCAM-CONNECTION-SETSET-NAME CHANNEL-IO Parameter Channels Output NUMBER-OF-BUFFERSADDITIONAL-INFO TASK-SELECTION DAB-CACHE-ID EIA-SVC-NUMBERIO-DEVICE MEMORY-CLASS DISK-FILE Parameter Devices File Parameter Filename LOG Tasks Isam Parameter POOL-NAMEPERIODIC-TASK Parameter USER-ID JOB-NAME Responsetime Parameter Scope SET-DEFINITION Servicetime ParameterCONNECTION-SET SET-NAME Partner Sysstat Parameter Devices Task Parameter Task Selection Defined Parameter Defined Parameter Measurement Status General administration dataTSN of SM2 Primary Administrator Measurement Status Either User Measurements Allowed Secondary Administrator AllowedStatus data on additional functions Privileged Measurements Defined CMS BcamCHA-IO COSM+ Selected Hosts Selected HostsInformation on the selected hosts Task / SS Status TableStatus Table Start Time Abended RunningEnded USE Term ReasonCreate Modul By Task User Measured ObjectsUser Measured Objects Isam Parameter Pool Measuring TSN Task Parameter Measured TSNMeasured USER-ID Measuring USER-IDPage System resource utilization by SM2 External storage utilization Method based on monitoring cycle CPU utilizationSystem resource utilization Method based on samples UTM monitoring program Write task and I/O buffer Main memory utilization System resource utilization User task statistics Causes of inaccuracies Inaccuracies resulting from marginal problemsAccuracy of the SM2 data Accuracy of the SM2 data Accuracy of the SM2 data Monitoring method inaccuracies Device utilization CPU utilizationChannel utilization Measures for reducing the error sources 1 SM2 together with VM2000 Special applicationsSpecial applications VM2000 VM2000 operation on /390 architecture 349 VM2000 operation on Risc architecture VM2000/SR Servicetime monitoring values with Symmetrix control Volume load with installed DRVChannel load with BUS peripherals Sample procedures Sample procedures 353 354 355 356 357 358 359 360 Variables reports Table of monitored variables Monitored variables Reports on monitored variables 363 Page Meaning Response NPC0055 Messages START-MEASUREMENT-PROGRAM Cosmos NPC0061 LINK=COSFIL NPC0068 MessagesWRAP-AROUND NPC0074 NPS0002 Messages NPS0015 NPS0025 Messages NPS0033 NPS0040 Class SW-MONITOR-ADMINISTRATION NPS0048 NPS0053 Messages NPS0065 NPS0502 Messages NPS0515 NPS0521 Messages BUFFER-LENGTH NPS0528 Check and correct monitoring program deﬁnition NPS0533 Messages NPS0540 NPS0545 Messages NPS0551 NPS0559 Messages NPS0564 NPS0569 Messages NPS0577 NPS0600 Messages Macro returns &00 NPS3004 NPS3013 Messages NPS3021 OPEN-MODE=EXTEND NPS4139 Messages NPS4310 NPS4317 NPS4354 NPS4553 Messages NPS4652 NPS4801 SM2R1 SYSLNK.SM2.130 SM2SM2U1 SRMLNK.SM2.130 Activating the syntax ﬁle Installation procedureInstallation MODIFY-MSG-FILE-ASSIGNMENT Creating a new Dssm catalog Writing to the Dssm conﬁguration ﬁle Loading and unloading the subsystem Metasyntax SDF syntax descriptionData types SDF syntax description Appendix Sufﬁxes for data types SDF syntax description Metasyntax Representation Meaning Examples Representation Meaning Examples GUIDANCE-MODE = *NO / *YES Data types Character set Special rules Data type Character set Special rules 411 412 Product-version Input format Vnn.nann Period Single quote 414 Suffixes for data types Sufﬁxes for data types Meaning Sufﬁx Meaning 417 418 419 AAD AB1AB2 D.XYA ABD D.XYB BAF F.XYA BBF F.XYB 421 ISP syntax description Appendix ISP syntax descriptionFormat description ISP syntax description Length of the statements Overview of SM2 statements Overview of statements for the SM2 administratorSM2 statements overview Appendix SM2 statements overview 426 427 428 429 430 431 432 433 434 435 436 AppendixSM2 statements overview Switch to system modeOverview of statements for the nonprivileged user Activate and deactivate Isam pools Monitor ﬁles Deﬁne output modeTerminate monitoring Call user help functions Select DAB cache area Select reportsStart output of selected reports Select cache area for PCA Device report Select controllers for PCA Cache report Select PFA cache area Output monitored objects Select Symmetrix controllersSelect UTM applications Start report output Determine monitoring status Monitor Isam poolsDeactivate all activated Isam pools Activation ModeActivation decision Background storage Caching Glossary Channels Counting of I/O operations and their duration Glossary CPU time and CPU service units on SR2000Deactivation, forced deactivation DMS I/O operations Glossary Dilation factorDwell time Excp ﬁrmware service time DCSExpanded storage ES Glossary Global storage GS Hardware service time DCSHardware service time non-DCS Hiperﬁle concept Main memory Glossary InteractionOverall performance Glossary Fault Glossary Paging in BS2000 Paging rate Paging I/O operationsPaging memory Path info Glossary Processor states Risc modeResponse time Service times deﬁnition DCS, I/O operations Glossary SDV Start Device Software service time non-DCS Software service time DCSTask queues Time equivalent for the housekeeping performance Glossary Time equivalent for the productive performance Transaction Glossary Virtual address space subdivision Page List of Figures Page List of Tables Page Related publications BS2000/OSD-BC V3.0 DMS Macros Hiplex Mscf V2.0A BS2000/OSD Multiprocessor System BS2000/OSD-BC V3.0 Performance Handbook Related publications BS2000/OSD-BC BS2000/OSD-BC System Installation User GuideSM2-PA V2.0A BS2000/OSD SM2 Program Analyzer User Guide Generating and Handling Applications User Guide Related publicationsVirtual Machine System User Guide Concepts and Functions User Guide 13 BS2000/OSD-BC V4.0 Commands, Volume 1, a C User Guide 15 BS2000/OSD-BC V4.0 Commands, Volume 3, MOD-J R User Guide 17 BS2000/OSD-BC V4.0 Commands, Volume 5, SH-P Z User Guide SDF-P-BASYS V2.1A OSD-SVP SR2000 Operation and Administration User GuideRelated publications 18 BS2000/OSD-BC User Reference Manual SHC-OSD V2.0A BS2000/OSD Symmetrix Host Component User Guide Srdf Related publications 23 BS2000/OSD Spool Index Index Disk controllers with cache File DCS Hiplex Mscf Nonprivileged monitoring program MIN MPL Index 483 PGE task 485 SENSE-SDV 487 Index 489 Index Contents Contents CHANGE-MEASUREMENT-PROGRAM MODIFY-ADMINISTRATOR-ADMISSIONCALL-EVALUATION-PART CLOSE-LOG-FILE SET-SYSSTAT-PARAMETER SET-PERIODIC-TASK-PARAMETERSET-RESPONSETIME-PARAMETER SHOW-ACTIVE-PARAMETER SM2 screen output 201 PCA Controller report 276 365 339361 401Page Software Monitor Volume 1 Administration and Operation Edition August Fax 0 89 6 36-4 04