Siemens SM2 monitoring system Responsetime report SM2 reports, Program TYPE=*RESPONSETIME

RESPONSETIME report SM2 reports

RESPONSETIME report

This report contains data on response times, think times, transaction times and wait times for messages in the BCAM pool.

Report output

The REPORT RESPONSE statement is used to request the output of the

RESPONSETIME report.

The report can only be output if the SM2 administrator has

–defined the monitoring parameters for response time statistics using the SET- RESPONSETIME-PARAMETER statement

–specified the connection sets to be monitored using the ADD-CONNECTION-SET statement

–activated the monitoring process using the statement START-MEASUREMENT-

PROGRAM TYPE=*RESPONSETIME

Depending on the definition of the SCOPE operand in the SET-RESPONSETIME- PARAMETER or MODIFY-RESPONSETIME-PARAMETER statement, SM2 output bucket- specific or category-specific screens.

In the case of SCOPE=*BUCKET, the user receives a separate screen for each of the connection sets to be monitored (up to 16, including global statistics) with bucket-specific values. Global statistics are output first.

292 U3585-J-Z125-8-76