Siemens U3585-J-Z125-8-76 1, SM2 monitoring system manual Statements for nonprivileged users

SM2 operation		Statements for nonprivileged users
	Statement	Function
	CHANGE-ISAM-STATISTICS	Include and exclude ISAM pools
	STOP-ISAM-STATISTICS	Terminate the monitoring of ISAM pools

Statements for controlling reports

The following statements are used to control reports.

Statement

OUTPUT

REPORT RESTART

START

Function

Define the output mode. Reports are output either automatically at regular intervals (automatic output mode) or at the request of the user (controlled mode).

Select reports

Start the output of selected reports. Unlike the START statement, this statement does not allow for the retrieval of new monitored data.

Start report output

In automatic output mode, the selected reports are output regularly over a defined period of time. The overflow screens are not output in this mode.

The period of time over which reports are output is known as the output cycle. When the program is started, this is preset to the current length of the monitoring cycle, but can be changed by the user. The interval between reports depends on the number of reports output in the last output cycle. In the first output cycle, reports are output without a delay. The user must ensure that a practical relationship is maintained between the monitoring cycle and the output cycle. Further information can be found under “Relationship between the monitoring cycle and the output cycle” on page 153.

U3585-J-Z125-8-76 151