Siemens U3585-J-Z125-8-76 1, SM2 monitoring system manual UTM Report, UTM report, Appli-Name

SM2 reports UTM report

UTM REPORT

This report provides monitored data on UTM applications.

Report output

The REPORT UTM statement is used to request the output of the UTM report.

The report can only be output if the SM2 administrator has activated the monitoring process using the statement START-MEASUREMENT-PROGRAM TYPE=*UTM.

The UTM report contains only dialog-oriented monitored data. The data relating to database calls and distributed processing (DDP) is averaged out for all the steps in a dialog, even for those steps which contain no DB calls or distributed processing calls.

Overflow screens may also be requested for this report.

The monitored data output is sorted in accordance with the number of dialog steps performed (#DS).

	D016ZE04 SM2 UTM						CYCLE:		60	S					96-04-11 15:08:00
			APPLI-	M	TIME		DB	TAC-CL			DDP		# DS	#DB-CALL #					#
			NAME	(S/DS)			(%)		(%)		(%)		(1/S) (1/DS)			TSK			USER
		+		+ +		+		+		+		+		+		+		+		+
			----------		--------		------		------		------		--------		--------		-----		-------
		F2POOL		S	0.1		0.0		0.0		0.0		0.0		0.0		3		1
		PAHT		S	0.2		0.0		0.0		0.0		0.0		0.0		1		1
+			----------	+---+	--------	+	------	+	------	+	------	+	--------	+	--------	+	-----	+	-------	+

Monitoring information

APPLI-NAME	Name of the UTM application
M	Mode of the UTM application
	S: UTM-S application
	F: UTM-F application
TIME	Average total dwell time in seconds for a dialog step (DS) measured
	by UTM as the time elapsed between UTM accepting a message
	and sending a message

U3585-J-Z125-8-76 311