Siemens U3585-J-Z125-8-76 1, SM2 monitoring system manual SM2 screen output

5 SM2 screen output

The monitoring task collects monitored data during an online monitoring cycle, edits it, and enters it in the central buffer when the online monitoring cycle is completed.

From the central buffer, each SM2 user task transfers the data into its own buffer and enters it in output forms called reports.

These monitored data reports can then either be output at regular intervals throughout the output cycle (automatic output mode), or can be requested individually by the user (controlled mode). See “Statements for controlling reports” on page 151.

In addition, SM2 information screens are available, some in the administration facility only and others in the analysis subinterval and the administration facility. Instead of monitored data, these contain information on the monitoring process and on the status of SM2. The following information screens can be output at the request of the user:

–MEASUREMENT STATUS

–USER MEASURED OBJECTS

–DEFINED PARAMETER

–ACTIVE PARAMETER

–STATUS TABLE

–SELECTED HOSTS

U3585-J-Z125-8-76 201