Siemens SM2 monitoring system manual Sysstat Parameter Devices, Task Parameter Task Selection

ACTIVE PARAMETER SM2 information screens

D016ZE04 SM2 ACTIVE PARAMETER		99-03-24 14:20:59
SYSSTAT PARAMETER
-----------------
DEVICES	: 431C, 4310, 4330, 434B, 434C, 4350, 4354, 4361, 4363,
	4370, 4379
TASK PARAMETER
--------------
TASK SELECTION	: *ALL
DEVICES	: 430D, 4310, 4312, 4314, 434C, 4350

Monitoring information

SYSSTAT PARAMETER

DEVICES	Mnemonic device names of the monitored devices or *NONE, *ALL,
	*TAPE or *DISK
TASK PARAMETER
TASK SELECTION	*ALL: All tasks are monitored.
	Tasks whose monitored data is to be written to the SM2 output file.
	Selected tasks are specified under the selection criterion TSN,
	USER-ID, JOB-NAME, JOB-CLASS or TYPE.
DEVICES	Mnemonic device names monitored by the task monitoring program
	for each task or *NONE, *ALL or *DISK

Note

If a selected monitoring program is not active, the message "MEASUREMENT NOT ACTIVE" is displayed in place of the parameters.

326 U3585-J-Z125-8-76