Toshiba e-Studio 165/205 manual Acceptable Media Types, Types of paper

Acceptable Media Types

This section explains about the media types acceptable for printing documents with this equip- ment. The media types, which are acceptable for printing data from client computers to this equipment, are the same as the ones acceptable for copying with this equipment, except for envelopes. Envelopes can be used only for printing data from client computers.

Types of paper

The media types and paper sizes shown in the table below are acceptable for the drawers of this equipment, the Paper Feed Unit (optional) and the Paper Feed Pedestal (optional).

Acceptable types of paper for copying and printing data sent from client computers

Feeder	Media type	Paper size	Maximum sheet
			capacity *1
Drawers of the	Plain paper	A/B format:	250 sheets
equipment	(64 - 80 g/m2)/(17-20 lb.	A3, A4, A4-R, B4, B5, B5-R,	(64 g/m2)/(17 lb. Bond)
and Paper	Bond)	FOLIO	250 sheets
Feed Unit		LT format:	(80 g/m2)/(20 lb. Bond)
(optional)		LD, LG, LT, LT-R, COMP, 13"LG
Drawers of the	Plain paper	A/B format:	550 sheets
Paper Feed	(64 - 80 g/m2)/(17-20 lb.	A3, A4, A4-R, A5-R, B4, B5, B5-R,	(64 g/m2)/(17 lb. Bond)
Pedestal	Bond)	FOLIO
			550 sheets
(optional)		LT format:	(80 g/m2)/(20 lb. Bond)
		LD, LG, LT, LT-R, ST-R, COMP,
		13"LG
Bypass tray	Plain paper	A/B format:	100 sheets
	(64 - 80 g/m2)/(17-20 lb.	A3, A4, A4-R, A5-R, B4, B5, B5-R,	(64 g/m2)/(17 lb. Bond)
	Bond)*2	FOLIO	100 sheets
		LT format:	(80 g/m2)/(20 lb. Bond)
		LD, LG, LT, LT-R, ST-R, COMP,
	THICK PAPER 1		1 sheet
		13"LG
	(81 - 105 g/m2)/(21-28		(81 - 105 g/m2)/(21-28
	lb. Bond)*3		lb. Bond)
	THICK PAPER 2		1 sheet
	(106 - 163 g/m2)/(29 lb.		(106 - 163 g/m2)/(29 lb.
	Bond – 90 lb. Index)*3		Bond – 90 lb. Index)
	Tracing paper		1 sheet
	(75 g/m2)/(20 lb.)*3
	Sticker labels*3		1 sheet
	Transparencies*3, *4	A4 only/LT only	1 sheet

*1 “Maximum sheet capacity” refers to the maximum number of sheets acceptable when TOSHIBA-recom- mended paper is used. For TOSHIBA-recommended paper, see the Operator’s Manual for Copying Functions.

*2 The paper of 50 to 63 g/m2 (13 to 16 lb.) Bond can be used if it is set on the bypass tray one by one.

*3 Automatic duplex printing is not available.

*4 Be sure to use the overhead transparencies that TOSHIBA recommends. When transparencies other than the TOSHIBA-recommended ones are used, this could cause an equipment malfunction.

yYou cannot mix various paper sizes in one drawer.

y"LT format" is a standard size used in North America.

Acceptable Media Types 15