Configuring Macintosh LPR printing

Before installing the printer driver for LPR printing on Macintosh, check with your system admin- istrator to make sure of the following:

- This equipment is connected to the network and turned on. - The TCP/IP setting is correct.

- LPD Printing Service is enabled on this equipment. Ask your administrator if the LPD Printing Service is enabled.

1 Start the Desktop Printer Utility.

yThe folder containing the Desktop Printer Utility differs depending on the Mac OS ver- sion. If you cannot locate the Desktop Printer Utility, search it in the boot disk.

yThe New Desktop Printer dialog box appears.

2 Make sure “LaserWriter 8” is selected in the “With” drop down menu, select “Printer (LPR)” and click [OK].

The Macintosh LPR Printer Selection dialog box opens.

3 Clickarea. [Change...] in the PostScript Printer Description (PPD) File

The Select a PostScript Printer Description File dialog box appears.

Installing Client Software for Macintosh 113

Page 113
Image 113
Toshiba e-Studio 165/205 manual Configuring Macintosh LPR printing, Start the Desktop Printer Utility