3 PRINTING
4 | If you want to add a margin on the outside edge, enter a width in the |
“Outer Margin” field. |
yYou can change the unit of the margin at the “Units” drop down box.
yThe center margin can be set from 0.000 inch to 1.00 inches in units of 0.01 inch when the unit is inch, and from 0.000 mm to 25.40 mm in units of 0.10 mm when the unit is mm.
5 If you want to create a booklet that can be read from right to left, check the “Number Pages from Right to Left” box.
6 If you want to print or insert a front cover, check the “Use Front Cover” box and then select, at the “Source” drop down box, the drawer where the front cover is loaded. Also, at the “Print Style” drop down box, select whether you are inserting a blank cover or printed front cover. Then select the paper type for a front cover at the “Paper Type” drop down box.
yPrint Style
This selects how you want to print a cover.
-Do not print on page — Select this to insert a blank cover.
-Print on both sides of page — Select this to print the first two page images on both sides of a cover.
yPaper Type
This sets the media type of the paper.
-Plain — Select this when printing on 20 lbs plain paper
-Thick1 — Select this when printing on
-Thick2 — Select this when printing on
-Transparency — Select this when printing on transparent sheets.
yWhen “Automatic” is selected in the “Source” drop down box, the paper is automati- cally selected according to the printed document size.
y“Print on both sides of page” is available only when
7 Set other print options you require and click [OK]. 8 Click [OK] or [Print] to send a print job.
The print job is printed as a booklet.
