Toshiba e-Studio 165/205 manual Printing booklets

3 PRINTING

3 To print or insert a back cover, check the “Use Back Cover” box and set the “Source”, “Print Style” and “Paper Type” options that you require.

yPrint Style

This selects how you want to print a back cover.

-Do not print on page — Select this to insert a blank cover.

-Print on 1 side of page — Select this to print the last page image on the front side of a cover.

-Print on both sides of page — Select this to print the last two page images on both sides of a cover.

yPaper Type

This sets the media type of the paper.

-Plain — Select this when printing on 20 lbs plain paper (64-80 g/m2 plain paper).

-Thick1 — Select this when printing on 24-28 lbs thick paper (81-105 g/m2 thick paper).

-Thick2 — Select this when printing on 32-90 lbs thick paper (106-163 g/m2 thick paper).

-Transparency — Select this when printing on transparent sheets.

yWhen “Automatic” is selected in the “Source” drop down box, the paper is automati- cally selected according to the printed document size.

y“Print on both sides of page” is available only when 2-Sided printing is enabled at the Setup tab.

yThe same paper type applies to both front cover and back cover. When the paper type for either cover is changed, the paper type for other cover is automatically set to the same one.

4

5

Set other print options you require and click [OK]. Click [OK] or [Print] to send a print job.

A front cover and back cover are printed or inserted for output.

— Printing booklets

Printing in normal booklet mode produces a document that, when folded, becomes a properly paginated booklet or magazine-style publication.

For example, if you create a document on letter-size paper (8½ x 11 inches) and then print in booklet mode, the yield is a 5½-x-8½-inch booklet. Each page has been scaled to fit on half a sheet and reordered so that the booklet is properly paginated when folded.

To retain your original document size when printing booklets, select the booklet size same as your original document size. Then, your 8½-inch document is printed on ledger size paper (11 x 17 inches) and reordered so that, when folded, the yield is an 8½-x-11-inch booklet. You can select from the following page-size options when printing a tiled booklet:

yLetter Booklet on Ledger

yA4 Booklet on A3

yB5 Booklet on B4

194 Printing from Windows