
Installing client software for Novell printing
This section describes how to install the client software for Novell printing on NetWare print server environments.
There are three ways to set up the printer drivers for Novell printing:
yUsing the installer in the Client Utilities
When you insert the Client Utilities
P.74 “Installation for Novell printing using the installer”
yUsing Point and Print
You can install the printer driver by
P.79 “Installation for Novell printing by Point and Print”
yUsing Add Printer Wizard
When you want to install the printer drivers without connecting to the equipment using Point and Print, install the printer drivers using the Add Printer Wizard.
P.86 “Installation for Novell printing by Add Printer Wizard”
The Font Manager is available to install and manage the TrueType fonts on your computer. To install the Font Manager, you must install it from the Client Utilities
P.246 “Installing Font Manager”
Before installing the printer driver for Novell printing, check with your system administrator to make sure of the following:
-This equipment is connected to the network and turned on.
-The NetWare server is configured correctly and running on your network.
-The IPX/SPX or TCP/IP, and NetWare settings are correct on this equipment.
Before installing the client software for Novell printing, please make sure following network ser- vices and protocols are installed on your computer:
Windows 98/ME
yTCP/IP protocol (Required only when using the NetWare in the TCP/IP network.)
y
yClient for NetWare Network
yService for NetWare Directory Service (Required only when using the NetWare server in NDS mode.)
Windows NT 4.0
yTCP/IP protocol (Required only when using the NetWare in the TCP/IP network.)
yNWLink IPX/SPX Compatible Transport protocol (Required only when using the NetWare in the IPX/SPX network.)
yNWLink NetBIOS protocol (Required only when using the NetWare in the IPX/SPX network.)
yGateway (and Client) Services for NetWare