DS33R11 Ethernet Mapper with Integrated T1/E1/J1 Transceiver
313 of 344
ABSOLUTE MAXIMUM RATINGS
Voltage Range on Any Lead with Respect to VSS (except VDD)….………………………………………..-0.5V to +5.5V
Supply Voltage (VDD3.3) Range with Respect to VSS……………..……………………………………….-0.3V to +3.6V
Supply Voltage (VDD1.8) with Respect to VSS………………………..…….……………………………….-0.3V to +2.0V
Ambient Operating Temperature Range………………………………...………………………………......-40°C to +85°C
Junction Operating Temperature Range…………………………………...………………………………-40°C to +125°C
Storage Temperature Range……………………………………………………………………………..…-55°C to +125°C
Soldering Temperature………………………………………………………....See IPC/JEDEC J-STD-020 Specification
These are stress ratings only and functional operation of the device at these or any other conditions beyond those indicated in the operation
sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods of time can affect reliability.
Ambient Operating Temperature Range is assuming the device is mounted on a JEDEC standard test board in a convection cooled JEDEC test
enclosure.
Note: The “typ” values listed below are not production tested.
Table 13-1. Recommended DC Operating Conditions
(VDD3.3 = 3.3V ±5%, VDD1.8 = 1.8V ±5%, Tj = -40°C to +85°C.)
PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS
Logic 1 VIH 2.35 3.465 V
Logic 0 VIL -0.3 +0.75 V
Supply (VDD3.3) ±5% VDD3.3 3.135 3.300 3.465 V
Supply (VDD1.8) ±5% VDD1.8 1.71 1.8 1.89 V
Table 13-2. DC Electrical Characteristics
(VDD3.3 = 3.3V ±5%, VDD1.8 = 1.8V ±5%, Tj = -40°C to +85°C.)
PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS
I/O Supply Current
(VDD3.3 = 3.465V) IDDIO (Notes 1, 2) 100
mA
Core Supply Current
(VDD1.8 = 1.89V) IDDCORE (Notes 1, 2) 30
mA
Lead Capacitance CIO (Note 3) 7 pF
IIL -10 +10
Input Leakage IILP -50 -10
μA
Output Leakage (when High-Z) ILO -10 +10
μA
(IOH = -4.0mA) VOH All outputs 2.35
(IOL = +4.0mA) VOL All outputs 0.75
(IOH = -8.0mA) VOH REF_CLKO 2.35
Output Voltage
(IOL = +12.0mA) VOL TSERO 0.75
V
VIL 0.75
Input Voltage VIH 2.35
V
Note 1: Typical power consumption is approximately 400mW.
Note 2: All outputs loaded with rated capacitance; all inputs between VDD and VSS; inputs with pullups connected to VDD.
Note 3: Value guaranteed by design (GBD).