EN

Light Mode ON or OFF - see “Activating the Backlight” section.

Tap On Lens ON or OFF- see “Tap On Lens” section.

To set these features:

1.Press MODE to navigate to the Real-Time Clock Mode.

2.Press SET repeatedly until you reach the feature you wish to change.

3.Press ST / SP / + or MEM / LAP / - to change the setting.

4.Press SET to confirm the setting and move on to the next one.

ACTIVATING THE BACKLIGHT

When the Light Mode is set to OFF:

Press to turn on the backlight for 3 seconds. Press any other key whilst the light is on and it will extend the light time by another 3 seconds.

When the Light Mode is set to ON:

Press any key to turn ON or extend the backlight for 3 seconds.

To help conserve power the Light Mode ON setting will automatically switch to OFF after 2 hours.

NOTE The backlight does not work when the low battery icon is shown and will return to normal once the batteries are replaced.

ACTIVATING THE KEYPAD LOCK

To turn the keypad lock ON or OFF:

5

Page 6
Image 6
Oregon Scientific SE188 user manual Activating the Backlight, Activating the Keypad Lock, To set these features