To view lap records:

1.The stopwatch must be stopped (press ST / SP / +).

2.Press MEM / LAP / -, then press ST / SP / + or MEM / LAP / - to select lap.

3.Press SET to view lap record.

The lap records will appear in the following order:

Lap time / maximum heart rate

Split time / average heart rate

Calorie and fat burn total - per lap

In zone time - per lap: Time spent without exceeding your upper or lower heart rate limit

Above zone time - per lap: Time spent exceeding your upper heart rate limit

Below zone time - per lap: Time spent exceeding your lower heart rate limit

BATTERIES

The SE188 uses two CR2032 lithium batteries, one for the watch and another for the heart rate chest belt. Both are already installed. See the table below for battery warnings.

LOW BATTERY ICON

DESCRIPTION

 

 

/

The battery is too low

to run the backlight

The chest belt battery is nearly too low to send a signal to the watch

The batteries typically last one year.

To replace the watch battery:

1.Undo the screws and remove the back plate.

2.Using a thin blunt instrument, hook the release catch and lift the clip.

3.Replace the old battery and then the battery clip.

4.Replace the back plate and screws.

To replace the chest belt battery:

1.Using a coin, twist the battery door counter-clockwise until it clicks out of place.

EN

19

Page 20
Image 20
Oregon Scientific SE188 user manual Batteries, LOW Battery Icon Description, To replace the watch battery