Oregon Scientific SE188 user manual Switching Between Operation Modes, Using the Clock

EN

• Press and hold	for 2 seconds.	will appear
on the display when the keypad lock is on.

TAP ON LENS

The tap on lens feature gives you easy access to 1 of 6 preset modes:

•Heart rate (HR)

•Stopwatch (STW)

•Smart Training Program (SMART)

•Calorie measurement (CAL)

•Lap timer (LAP)

•Time

To set the tap on lens preset mode:

1.In clock mode, press SET repeatedly until you reach the tap on lens “ON” display.

appears when the tap on lens is activated and flashes when the preset display is shown.

SWITCHING BETWEEN OPERATION MODES

Press MODE to switch between the 5 operation modes:

•Real-Time Clock

•Alarm Clock

•User Profile / Exercise Profile

•Timer - SMART TRAINING PROGRAM

•Stopwatch

The modes are described in the sections that follow.

NOTE You can run the SMART TRAINING PROGRAM or stopwatch in the background as you access other modes. The icon for the mode that is running will flash until you switch back to that mode.

2.Press and hold SET to enter the preset modes selection.

3.Press ST / SP / + or MEM / LAP / - to select the preset mode.

4.Press SET to confirm.

To use the tap on lens:

Simply tap on the lens and your preset mode will display for 10 seconds before returning to the previous screen.

6

USING THE CLOCK

The real-time clock is the default display for the watch. To set the real-time clock:

1.Press MODE to switch to Real-Time Clock Mode.

2.Press and hold SET until the first setting flashes.