Schneider Electric 61 user manual Analog outputs, AI4C, AO1C, AO2C

I/O parameters

Code			Description
AI4C	Parameter name:	Physical image of analog input 4
	Logic address:	5245 = 16#147D		Type:	INT
	CANopen index:	2016/2E		Read/write:	R
	INTERBUS index:	5FB9/39		Unit:	0.001 V or 0.001 mA
	DeviceNet path:	7B/01/2E
	The unit is:
	• 0.001 V if parameter [AI4 Type] (AI4t) is configured as [Voltage] (10U)
	• 0.001 mA if parameter [AI4 Type] (AI4t) is configured as [Current] (0A)
AI4r	Parameter name:	Standardized image of analog input 4
	Logic address:	5235 = 16#1473		Type:	INT
	CANopen index:	2016/24		Read/write:	R
	INTERBUS index:	5FB9/35		Unit:	1
	DeviceNet path:	7B/01/24

Analog outputs

The analog outputs can be controlled via the network. Simply write these parameters. The outputs to be controlled must not be assigned to a drive function, otherwise the write operation has no effect.

Code		Description
AO1C	Parameter name:	Physical image of analog output 1
	Logic address:	5271 = 16#1497	Type:	INT
	CANopen index:	2016/48	Read/write:	R/W
	INTERBUS index:	5FB9/40 (reading via PCP)	Unit:	0.001 mA or 0.001 V
		5FB6/50 (writing via PCP)
	DeviceNet path:	7B/01/48
	The unit is:
	• 0.001 V if parameter [AO1 Type] (AO1t) is configured as [Voltage] (10U)
	• 0.001 mA if parameter [AO1 Type] (AO1t) is configured as [Current] (0A)
AO1r	Parameter name:	Standardized image of analog output 1
	Logic address:	5261 = 16#148D	Type:	INT
	CANopen index:	2016/3E	Read/write:	R/W
	INTERBUS index:	5FB9/3D (reading via PCP)	Unit:	1
		5FB6/4F (writing via PCP)
	DeviceNet path:	7B/01/3E
AO2C	Parameter name:	Physical image of analog output 2
	Logic address:	5272 = 16#1498	Type:	INT
	CANopen index:	2016/49	Read/write:	R/W
	INTERBUS index:	5FB9/41 (reading via PCP)	Unit:	0.001 mA or 0.001 V
		5FB6/52 (writing via PCP)
	DeviceNet path:	7B/01/49
	The unit is:
	• 0.001 V if parameter [AO2 Type] (AO2t) is configured as [Voltage] (10U) or [Voltage +/-](n10U)
	• 0.001 mA if parameter [AO2 Type] (AO2t) is configured as [Current] (0A)
98